From mboxrd@z Thu Jan 1 00:00:00 1970 From: Todd Poynor Subject: Re: Trasnferring u-boot to P2 730 Date: Fri, 07 Apr 2006 09:47:18 -0700 Message-ID: <44369796.9030300@mvista.com> References: <3d3153f60604070015g5e260b69v3bc680d29f99fc@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <3d3153f60604070015g5e260b69v3bc680d29f99fc@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: Ola Helm Cc: cp_singh@faith.co.jp, Linux-omap-open-source@linux.omap.com, kangjw@lenovo.com List-Id: linux-omap@vger.kernel.org Ola Helm wrote: ... >> I have also tried to have connection via JTAG but it does not get >> connected >> even though I tried different switch / jumper settings, now >> JP1: 1-2 >> JP2: 1-2 >> JP3: 2-3 I did this once via an Abatron BDI-2000. George Davis had previously got it working using the small JTAG debug board that shipped with some versions of OMAP 730/16xx based on the "surfer" board; so far as I know we never got a BDI to talk to the multiport debug card shipped with P2 boards. On the JTAG board: * Jumper JP1 at 2-3 * Jumper JP2 at 1-2 * Jumper JP3 at 1-2 The P2 switches that worked for me included NOR and FULL/FASTBOOT = ON. bdi config file used: WM32 0xfffecc0c 0x00000012 ; EMIFS CONFIG = NOR flash CS3 and maybe some other stuff that I cribbed from the u-boot board setup code. -- Todd