From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: 1710 and USB host Date: Mon, 01 May 2006 10:54:00 -0700 Message-ID: <44564B38.9020802@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org Anyone else having success using the 1710 in USB host mode? Using the latest git kernel, I'm getting the boot messages below. I have a USB key plugged in and it's lighting up, so presumably it's getting powered properly. Maybe the jumpers aren't set quite right, I don't quite grok the comments around the 'hmc_mode' value in. board-h3.c. In any case, my SW1501 settings are 1=on, and the rest are off. Thanks for any pointers, Kevin isp1301_omap 0-002d: chiprev 2.00, driver 24 August 2004 MUX: initialized N21_1710_GPIO14 usbmon: debugfs is not available isp1301_omap 0-002d: A-Host sessions ok ohci ohci: OMAP OHCI ohci ohci: new USB bus registered, assigned bus number 1 ohci ohci: irq 38, io mem 0xfffba000 ohci ohci: init err (00000000 0000) ohci ohci: can't start ohci ohci: startup error -75 ohci ohci: USB bus 1 deregistered ohci: probe of ohci failed with error -75