From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Li Weichen" <iaadoa@gmail.com>
Subject: How to program flash of custom OMAP board?
Date: Sat, 6 May 2006 00:08:00 +0800
Message-ID: <445b7863.3e20ff6b.367d.ffff84b6@mx.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <linux-omap-open-source-bounces@linux.omap.com>
List-Unsubscribe: <http://linux.omap.com/mailman/listinfo/linux-omap-open-source>,
	<mailto:linux-omap-open-source-request@linux.omap.com?subject=unsubscribe>
List-Archive: <http://linux.omap.com/pipermail/linux-omap-open-source>
List-Post: <mailto:linux-omap-open-source@linux.omap.com>
List-Help: <mailto:linux-omap-open-source-request@linux.omap.com?subject=help>
List-Subscribe: <http://linux.omap.com/mailman/listinfo/linux-omap-open-source>,
	<mailto:linux-omap-open-source-request@linux.omap.com?subject=subscribe>
Sender: linux-omap-open-source-bounces@linux.omap.com
Errors-To: linux-omap-open-source-bounces@linux.omap.com
To: linux-omap-open-source@linux.omap.com
List-Id: linux-omap@vger.kernel.org

Hi everyone,

I have a custom OMAP 5912 board with Intel 28F256J3C NOR Flash.  But I don't
know how to download the u-boot to it.  With OSK, the factory
u-boot-1.1.1.out can be loaded in CCS and download itself while running.
But due to the different flash type, this factory u-boot cannot be
programmed to the custom OMAP board.

Does anyone have any idea to resolve this problem?

Thank you in advance and best regards!


Li Weichen