From: "Li Weichen" <iaadoa@gmail.com>
To: "'Woodruff, Richard'" <r-woodruff2@ti.com>,
linux-omap-open-source@linux.omap.com
Subject: RE: How to program flash of custom OMAP board?
Date: Sat, 6 May 2006 16:15:41 +0800 [thread overview]
Message-ID: <445c5b32.01f8c5fc.422c.5691@mx.gmail.com> (raw)
In-Reply-To: <EA12F909C0431D458B9D18A176BEE4A5058CDD50@dlee02.ent.ti.com>
> For many OMAP-u-boot ports, if you have a JTAG debugger, you can connect
> to the board, initialize clocks & ddr via script, load u-boot into
> memory and execute it. Now you can download using either your JTAG or
> ether the image you want to burn and use u-boot to burn that image.
>
But after I load the u-boot and run, it seems not work, only stop at the
beginning of the codes and there is not any information at the UART.
next prev parent reply other threads:[~2006-05-06 8:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-05 16:19 How to program flash of custom OMAP board? Woodruff, Richard
2006-05-06 8:15 ` Li Weichen [this message]
2006-05-07 0:01 ` Jason Huang
-- strict thread matches above, loose matches on Subject: below --
2006-05-08 6:58 Ishigami, Tatsuya
2006-05-06 13:58 Woodruff, Richard
2006-05-05 16:08 Li Weichen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=445c5b32.01f8c5fc.422c.5691@mx.gmail.com \
--to=iaadoa@gmail.com \
--cc=linux-omap-open-source@linux.omap.com \
--cc=r-woodruff2@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox