From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Anil .S" Subject: RTDX help required Date: Tue, 09 May 2006 10:15:20 +0530 Message-ID: <44601E60.60207@mistralsoftware.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org Hi All, I'm trying bring up the RTDX communication between the OMAP5912 OSK board a Host PC (Intel x86). When I configure the RTDX for the DSP core of OMAP5912, the communication happens seamlessly. I would like to know if its possible to configure the ARM core of OMAP5912 to support the RTDX channel. If somebody can throw some light on this, its highly appreciated. I don't know if this is the proper mailing thread to discuss this issue, but I couldn't locate one that deals with the RTDX technical problems. Hope to get a prompt response, Warm Regards, Anil -------------------------------------------------------DISCLAIMER------------------------------------------------------ The information transmitted herewith is confidential and proprietary information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ---------------------------------------------------------------------------------------------------------------------------