* regarding bootloader fusing
@ 2006-05-31 5:20 balaji durai
0 siblings, 0 replies; 2+ messages in thread
From: balaji durai @ 2006-05-31 5:20 UTC (permalink / raw)
To: linux-omap-open-source
hi ,
i am currently working on osk5912 for my development. i am using
linux-2.6.12 kernel and u-boot bootloader. i had query, how to fuse the
bootloader to the target bootloader without the help of JTAG/BDM debugger. i
want information is there is any other utility program to fuse bootloader to
the target board using open- source software
Regards
Balaji.C
SANDS Instrumentation
^ permalink raw reply [flat|nested] 2+ messages in thread
* regarding bootloader fusing
@ 2006-05-31 6:28 Martin Margraf
0 siblings, 0 replies; 2+ messages in thread
From: Martin Margraf @ 2006-05-31 6:28 UTC (permalink / raw)
To: balajicdurai; +Cc: linux-omap-open-source
hi,
there is a tool called OST Tool 2.5. With this program you can flash the
bootloader.
But you need an type A to type A usb cable. Its pretty easy to use, i
think there is a description
available.
another way to bring the bootloader to the osk5912 is using a serial
communication program like
Hyperterminal (windows) or Minicom (linux).
http://linux.omap.com/pub/documentation/U-Boot for the OMAP16xx.pdf
or look at the OSK5912 Newbie Guide written by Matthew Percival
regards
martin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-05-31 6:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-31 6:28 regarding bootloader fusing Martin Margraf
-- strict thread matches above, loose matches on Subject: below --
2006-05-31 5:20 balaji durai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox