From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlos Aguiar Subject: Re: Problem booting in OMAP H3 1710 Date: Tue, 01 Aug 2006 17:24:10 -0400 Message-ID: <44CFC67A.7090208@indt.org.br> References: <44C4E6CD.3020303@indt.org.br> <20060725102626.GA2143@localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20060725102626.GA2143@localdomain> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: "ext imre.deak@solidboot.com" Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org ext imre.deak@solidboot.com wrote: >Hi, > >On Mon, Jul 24, 2006 at 11:27:09AM -0400, Carlos Aguiar wrote: > > >>Hello folks, >> >>I'm trying to boot a kernel image to OMAP H3 1710 generated from >>linux-omap-2.6.git (v2.6.17-omap1) tree, but I'm having the following >>problem (kernel panic) below. >> >>This kernel image it's with 'Kernel low-level debugging functions' support. >> >>Is there anybody having the same problem ? >> >> > >I think this bug was fixed by >http://linux.omap.com/pipermail/linux-omap-open-source/2006-July/007515.html > >It's been also pushed to the omap tree yesterday. Could you check >if you have it locally? > >--Imre > > > >>Thanks in advance, >> >>Carlos. >> >>... >> >><6>omapfb: configured for panel h3 >><6>omapfb: LCDC initialized >><1>Unable to handle kernel paging request at virtual address 00009600 >><1>pgd = c0004000 >><1>[00009600] *pgd=00000000 >>Internal error: Oops: 805 [#1] >>Modules linked in: >>CPU: 0 >>PC is at cfb_imageblit+0x210/0x49c >>LR is at 0x6 >>pc : [] lr : [<00000006>] Not tainted >>sp : c02b39e4 ip : c02c0000 fp : c02b3a54 >>r10: 00000002 r9 : c02c0000 r8 : 00000000 >>r7 : c01f75a8 r6 : 00000000 r5 : c034f800 r4 : 00009600 >>r3 : 00000000 r2 : 00000007 r1 : 00000002 r0 : 00000004 >>Flags: nzCv IRQs on FIQs on Mode SVC_32 Segment kernel >>Control: 5317F Table: 10004000 DAC: 00000017 >>Process swapper (pid: 1, stack limit = 0xc02b2198) >> >> > > > > Hi Imre and folks, I was testing by disabling the 'OMAP frame buffer support (EXPERIMENTAL)' support option but the modification you mentioned in the link works fine on H3 1710. Thanks, Carlos. -- Carlos Eduardo Nokia Institute of Technology - INdT Embedded Linux Laboratory - 10LE Phone: +55 92 2126-1079 Mobile: +55 92 8127-1797 E-mail: carlos.aguiar@indt.org.br