From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: Re: How to upload u-boot to H3 with serial port ? Date: Thu, 31 Aug 2006 22:12:47 -0500 Message-ID: <44F7A52F.3030402@gmail.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: "Kipisz, Steven" Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org Greeting Miao/Amit >> I want upload u-boot to H3, but I don't have JTAG and CCS, I only have >> serial port. CCS,Lauterbach, USB.. And.... There is supposedly a "poor man's" approach... ;) There is OST host(some name to that effect) tool which should be usable over serial port... if you are lucky enough to get the box in which the h3 came with, then it hides innocently in a CD in it... http://linux.omap.com/pub/documentation/P2_NAND_boot_support.txt can help you started though it is for P2.. but note that this was written sometime back... things have changed since then, but most probably not about OST host - if u can flash u-boot to flash.. Ur good to GO :)!! If you cant find OST host... u could contact your TI contact person for it.. Regards, Nishanth Menon