* Current git and default config @ 2006-10-09 20:37 Philip Balister 2006-10-10 16:55 ` Dirk Behme 2006-10-11 7:33 ` Jonathan McDowell 0 siblings, 2 replies; 5+ messages in thread From: Philip Balister @ 2006-10-09 20:37 UTC (permalink / raw) To: OMAP If you run make omap5917osk_defconfig and build, the build fails because some dsp related symbols are needed. Changing to config to add the dspgw allows the kernel to build and run on the OSK. Philip ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Current git and default config 2006-10-09 20:37 Current git and default config Philip Balister @ 2006-10-10 16:55 ` Dirk Behme 2006-10-11 7:33 ` Jonathan McDowell 1 sibling, 0 replies; 5+ messages in thread From: Dirk Behme @ 2006-10-10 16:55 UTC (permalink / raw) To: Philip Balister; +Cc: OMAP Philip Balister wrote: > If you run make omap5917osk_defconfig and build, the build fails because > some dsp related symbols are needed. Changing to config to add the dspgw > allows the kernel to build and run on the OSK. Do you like to send a patch to update omap591_osk_defconfig? Regards Dirk ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Current git and default config 2006-10-09 20:37 Current git and default config Philip Balister 2006-10-10 16:55 ` Dirk Behme @ 2006-10-11 7:33 ` Jonathan McDowell 2006-10-11 8:06 ` Khem Raj 1 sibling, 1 reply; 5+ messages in thread From: Jonathan McDowell @ 2006-10-11 7:33 UTC (permalink / raw) To: linux-omap-open-source On Mon, Oct 09, 2006 at 04:37:22PM -0400, Philip Balister wrote: > If you run make omap5917osk_defconfig and build, the build fails because > some dsp related symbols are needed. Changing to config to add the dspgw > allows the kernel to build and run on the OSK. Does the patch at http://linux.omap.com/pipermail/linux-omap-open-source/2006-October/008064.html fix the compilation issue for you if you don't change the config? J. -- Graduate of the Darth Vader School of Personnel Management. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Current git and default config 2006-10-11 7:33 ` Jonathan McDowell @ 2006-10-11 8:06 ` Khem Raj 2006-10-11 11:02 ` Philip Balister 0 siblings, 1 reply; 5+ messages in thread From: Khem Raj @ 2006-10-11 8:06 UTC (permalink / raw) To: Jonathan McDowell; +Cc: linux-omap-open-source On Oct 11, 2006, at 12:33 AM, Jonathan McDowell wrote: > > Does the patch at > > http://linux.omap.com/pipermail/linux-omap-open-source/2006-October/ > 008064.html > > fix the compilation issue for you if you don't change the config? FWIW It fixed the compilation issues for me using default config and I could build kernel and also boot it on osk5912 board. Thanks Khem Raj <kraj@mvista.com> MontaVista Software Inc. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Current git and default config 2006-10-11 8:06 ` Khem Raj @ 2006-10-11 11:02 ` Philip Balister 0 siblings, 0 replies; 5+ messages in thread From: Philip Balister @ 2006-10-11 11:02 UTC (permalink / raw) To: Khem Raj; +Cc: linux-omap-open-source I think there are two issues: 1) The patch that allows compilation on the OSK without the dspgw is needed. 2) For the OSK, should the dspgw be in the default configuration? I think so. Philip Khem Raj wrote: > > On Oct 11, 2006, at 12:33 AM, Jonathan McDowell wrote: > >> >> Does the patch at >> >> http://linux.omap.com/pipermail/linux-omap-open-source/2006-October/ >> 008064.html >> >> fix the compilation issue for you if you don't change the config? > > > FWIW It fixed the compilation issues for me using default config and I > could build kernel and also boot it on osk5912 board. > > Thanks > > > Khem Raj <kraj@mvista.com> > MontaVista Software Inc. > > > > _______________________________________________ > Linux-omap-open-source mailing list > Linux-omap-open-source@linux.omap.com > http://linux.omap.com/mailman/listinfo/linux-omap-open-source > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-10-11 11:02 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-10-09 20:37 Current git and default config Philip Balister 2006-10-10 16:55 ` Dirk Behme 2006-10-11 7:33 ` Jonathan McDowell 2006-10-11 8:06 ` Khem Raj 2006-10-11 11:02 ` Philip Balister
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox