[PATCH]: Fixing blksz_bits calling inside drivers/mmc/mmc.c and drivers/mmc/omap.c

[Felipe Balbi <ext-felipe.lima@nokia.com>]

[-- Attachment #1: Type: text/plain, Size: 536 bytes --]

This small patch solves the problem ;-)

Here's the error dump:
drivers/mmc/omap.c: In function 'mmc_omap_prepare_dma':
drivers/mmc/omap.c:636: error: 'struct mmc_data' has no member named 
'blksz_bits'
drivers/mmc/omap.c:639: error: 'struct mmc_data' has no member named 
'blksz_bits'
drivers/mmc/omap.c: In function 'mmc_omap_prepare_data':
drivers/mmc/omap.c:828: error: 'struct mmc_data' has no member named 
'blksz_bits'

Obs: The same occurs for drivers/mmc/mmc.c file

-- 
Regards,

Felipe Balbi
ext-felipe.lima@nokia.com
OSMRC


[-- Attachment #2: patch-mmc.c.diff --]
[-- Type: text/x-patch, Size: 1210 bytes --]

Index: linux-omap/drivers/mmc/omap.c
===================================================================
--- linux-omap.orig/drivers/mmc/omap.c	2006-10-27 09:18:34.000000000 -0400
+++ linux-omap/drivers/mmc/omap.c	2006-10-27 11:03:14.000000000 -0400
@@ -633,10 +633,10 @@ mmc_omap_prepare_dma(struct mmc_omap_hos
 	int sync_dev = 0;
 
 	data_addr = host->phys_base + OMAP_MMC_REG_DATA;
-	frame = 1 << data->blksz_bits;
+	frame = 1 << data->blksz;
 	count = sg_dma_len(sg);
 
-	if ((data->blocks == 1) && (count > (1 << data->blksz_bits)))
+	if ((data->blocks == 1) && (count > (1 << data->blksz)))
 		count = frame;
 
 	host->dma_len = count;
@@ -825,7 +825,7 @@ mmc_omap_prepare_data(struct mmc_omap_ho
 	}
 
 
-	block_size = 1 << data->blksz_bits;
+	block_size = 1 << data->blksz;
 
 	OMAP_MMC_WRITE(host, NBLK, data->blocks - 1);
 	OMAP_MMC_WRITE(host, BLEN, block_size - 1);

--- linux-omap/drivers/mmc/mmc.c	2006-10-26 06:42:31.000000000 -0400
+++ linux-omap-dev/drivers/mmc/mmc.c	2006-10-26 09:53:24.000000000 -0400
@@ -996,7 +996,7 @@
 
 		mmc_set_data_timeout(&data, card, 0);
 
-		data.blksz = 1 << 3;
+		data.blksz_bits = 1 << 3;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;
 		data.sg = &sg;


[-- Attachment #3: Type: text/plain, Size: 0 bytes --]