From: Dirk Behme <dirk.behme@googlemail.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH] ARM: OMAP1: Fix CONFIG_DEBUG_LL
Date: Sat, 28 Oct 2006 08:15:33 +0200 [thread overview]
Message-ID: <4542F585.1070604@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 278 bytes --]
Fix broken CONFIG_DEBUG_LL. In case of low level debugging
reconfigure some clocks early.
See
http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093
too.
Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
[-- Attachment #2: omap1_CONFIG_DEBUG_LL_patch.txt --]
[-- Type: text/plain, Size: 640 bytes --]
Index: linux-osk/arch/arm/mach-omap1/clock.c
===================================================================
--- linux-osk.orig/arch/arm/mach-omap1/clock.c
+++ linux-osk/arch/arm/mach-omap1/clock.c
@@ -649,6 +649,13 @@ int __init omap1_clk_init(void)
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
+#ifdef CONFIG_DEBUG_LL
+ /* Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on.
+ */
+ omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
reply other threads:[~2006-10-28 6:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4542F585.1070604@gmail.com \
--to=dirk.behme@googlemail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox