Porting uClinux to OMAP5912

Porting uClinux to OMAP5912

[Sun Chao]

	Hi every one:
                I'm working on a project that will port uClinux on the
        OMAP 5912 board. Because I'm now a newbie to uClinux and
        embedded systems, I have some questions:
                1. Does the current uClinux support OMAP 5912? When I
        config the linux 2.6 kernel in uClinux, I can find the choice of
        TI OMAP, but there are only OMAP 16** and other choices without
        the OMAP 5912 being included.
                2. If I must do some work to make the uClinux be able to
        run on the OMAP 5912 platform, what shall I do? 
                I will be great appreciate for your patient answer.
-- 
Best Regards!

Re: Porting uClinux to OMAP5912

[Vishal Borker]

uClinux on OMAP 5912 - do you intend to run ucLinux on the ARM core ? or 
the DSP core?
The requirements change accordingly. 
If you want to get it up on the ARM, you'd need to disable the mmu.
Getting uCLinux on the DSP would be a whole new thing. toolchain and 
all. :) . Much like what was done with the AD blackfin..

Sun Chao wrote:
> 	Hi every one:
>                 I'm working on a project that will port uClinux on the
>         OMAP 5912 board. Because I'm now a newbie to uClinux and
>         embedded systems, I have some questions:
>                 1. Does the current uClinux support OMAP 5912? When I
>         config the linux 2.6 kernel in uClinux, I can find the choice of
>         TI OMAP, but there are only OMAP 16** and other choices without
>         the OMAP 5912 being included.
>                 2. If I must do some work to make the uClinux be able to
>         run on the OMAP 5912 platform, what shall I do? 
>                 I will be great appreciate for your patient answer.
>