From: Dirk Behme <dirk.behme@googlemail.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH] ARM: OMAP: Fix warnings in plat-omap/dsp
Date: Sat, 04 Nov 2006 16:49:59 +0100 [thread overview]
Message-ID: <454CB6A7.4010707@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 161 bytes --]
Fix various warnings
warning: ignoring return value of 'xxx', declared with
attribute warn_unused_result
Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
[-- Attachment #2: plat_omap_dsp_warning_patch.txt --]
[-- Type: text/plain, Size: 5974 bytes --]
Index: linux-osk/arch/arm/plat-omap/dsp/dsp_ctl.c
===================================================================
--- linux-osk.orig/arch/arm/plat-omap/dsp/dsp_ctl.c
+++ linux-osk/arch/arm/plat-omap/dsp/dsp_ctl.c
@@ -273,7 +273,9 @@ static int dsp_cfg(void)
goto out;
/* create runtime sysfs entries */
- device_create_file(omap_dsp->dev, &dev_attr_loadinfo);
+ ret = device_create_file(omap_dsp->dev, &dev_attr_loadinfo);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
out:
dsp_mem_disable((void *)dspmem_base);
@@ -1038,9 +1040,13 @@ out:
void __init dsp_ctl_init(void)
{
- device_create_file(omap_dsp->dev, &dev_attr_ifver);
- device_create_file(omap_dsp->dev, &dev_attr_cpustat);
- device_create_file(omap_dsp->dev, &dev_attr_icrmask);
+ int ret;
+
+ ret = device_create_file(omap_dsp->dev, &dev_attr_ifver);
+ ret |= device_create_file(omap_dsp->dev, &dev_attr_cpustat);
+ ret |= device_create_file(omap_dsp->dev, &dev_attr_icrmask);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
}
void dsp_ctl_exit(void)
Index: linux-osk/arch/arm/plat-omap/dsp/dsp_mem.c
===================================================================
--- linux-osk.orig/arch/arm/plat-omap/dsp/dsp_mem.c
+++ linux-osk/arch/arm/plat-omap/dsp/dsp_mem.c
@@ -2504,9 +2504,11 @@ int __init dsp_mem_init(void)
/* MMU interrupt is not enabled until DSP runs */
disable_irq(omap_dsp->mmu_irq);
- device_create_file(omap_dsp->dev, &dev_attr_mmu);
- device_create_file(omap_dsp->dev, &dev_attr_exmap);
- device_create_file(omap_dsp->dev, &dev_attr_mempool);
+ ret = device_create_file(omap_dsp->dev, &dev_attr_mmu);
+ ret |= device_create_file(omap_dsp->dev, &dev_attr_exmap);
+ ret |= device_create_file(omap_dsp->dev, &dev_attr_mempool);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
return 0;
}
Index: linux-osk/arch/arm/plat-omap/dsp/ipbuf.c
===================================================================
--- linux-osk.orig/arch/arm/plat-omap/dsp/ipbuf.c
+++ linux-osk/arch/arm/plat-omap/dsp/ipbuf.c
@@ -117,7 +117,9 @@ int ipbuf_config(u16 ln, u16 lsz, void *
" %d words * %d lines at 0x%p.\n",
ipbcfg.lsz, ipbcfg.ln, ipbcfg.base);
- device_create_file(omap_dsp->dev, &dev_attr_ipbuf);
+ ret = device_create_file(omap_dsp->dev, &dev_attr_ipbuf);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
return ret;
Index: linux-osk/arch/arm/plat-omap/dsp/mblog.c
===================================================================
--- linux-osk.orig/arch/arm/plat-omap/dsp/mblog.c
+++ linux-osk/arch/arm/plat-omap/dsp/mblog.c
@@ -260,7 +260,11 @@ static struct device_attribute dev_attr_
void __init mblog_init(void)
{
- device_create_file(omap_dsp->dev, &dev_attr_mblog);
+ int ret;
+
+ ret = device_create_file(omap_dsp->dev, &dev_attr_mblog);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
}
void mblog_exit(void)
Index: linux-osk/arch/arm/plat-omap/dsp/task.c
===================================================================
--- linux-osk.orig/arch/arm/plat-omap/dsp/task.c
+++ linux-osk/arch/arm/plat-omap/dsp/task.c
@@ -1789,6 +1789,8 @@ static void dsptask_dev_release(struct d
static int taskdev_init(struct taskdev *dev, char *name, unsigned char minor)
{
+ int ret;
+
taskdev[minor] = dev;
spin_lock_init(&dev->proc_list_lock);
@@ -1815,10 +1817,14 @@ static int taskdev_init(struct taskdev *
dev->dev.bus = &dsptask_bus;
sprintf(dev->dev.bus_id, "dsptask%d", minor);
dev->dev.release = dsptask_dev_release;
- device_register(&dev->dev);
- device_create_file(&dev->dev, &dev_attr_devname);
- device_create_file(&dev->dev, &dev_attr_devstate);
- device_create_file(&dev->dev, &dev_attr_proc_list);
+ ret = device_register(&dev->dev);
+ if (ret)
+ printk(KERN_ERR "device_register failed: %d\n", ret);
+ ret = device_create_file(&dev->dev, &dev_attr_devname);
+ ret |= device_create_file(&dev->dev, &dev_attr_devstate);
+ ret |= device_create_file(&dev->dev, &dev_attr_proc_list);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
class_device_create(dsp_task_class, NULL,
MKDEV(OMAP_DSP_TASK_MAJOR, minor),
NULL, "dsptask%d", minor);
@@ -1847,6 +1853,7 @@ static void taskdev_delete(unsigned char
static int taskdev_attach_task(struct taskdev *dev, struct dsptask *task)
{
u16 ttyp = task->ttyp;
+ int ret;
dev->fops.read =
sndtyp_acv(ttyp) ?
@@ -1883,16 +1890,18 @@ static int taskdev_attach_task(struct ta
if (task->map_length)
dev->fops.mmap = dsp_task_mmap;
- device_create_file(&dev->dev, &dev_attr_taskname);
- device_create_file(&dev->dev, &dev_attr_ttyp);
+ ret = device_create_file(&dev->dev, &dev_attr_taskname);
+ ret |= device_create_file(&dev->dev, &dev_attr_ttyp);
if (sndtyp_wd(ttyp)) {
- device_create_file(&dev->dev, &dev_attr_fifosz);
- device_create_file(&dev->dev, &dev_attr_fifocnt);
+ ret |= device_create_file(&dev->dev, &dev_attr_fifosz);
+ ret |= device_create_file(&dev->dev, &dev_attr_fifocnt);
} else
- device_create_file(&dev->dev, &dev_attr_ipblink);
- device_create_file(&dev->dev, &dev_attr_wsz);
+ ret |= device_create_file(&dev->dev, &dev_attr_ipblink);
+ ret |= device_create_file(&dev->dev, &dev_attr_wsz);
if (task->map_length)
- device_create_file(&dev->dev, &dev_attr_mmap);
+ ret |= device_create_file(&dev->dev, &dev_attr_mmap);
+ if (ret)
+ printk(KERN_ERR "device_create_file failed: %d\n", ret);
dev->task = task;
task->dev = dev;
@@ -2989,7 +2998,14 @@ int __init dsp_taskmod_init(void)
return retval;
}
- bus_register(&dsptask_bus);
+ retval = bus_register(&dsptask_bus);
+ if (retval) {
+ printk(KERN_ERR
+ "omapdsp: failed to register DSP task bus: %d\n",
+ retval);
+ unregister_chrdev(OMAP_DSP_TASK_MAJOR, "dsptask");
+ return -EINVAL;
+ }
retval = driver_register(&dsptask_driver);
if (retval) {
printk(KERN_ERR
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next reply other threads:[~2006-11-04 15:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-04 15:49 Dirk Behme [this message]
2006-11-09 23:25 ` [PATCH] ARM: OMAP: Fix warnings in plat-omap/dsp Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2006-10-27 16:14 Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=454CB6A7.4010707@gmail.com \
--to=dirk.behme@googlemail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox