* AIC23 Codec Driver for DSP/BIOS
@ 2007-01-04 6:46 Raghunandan Dhongadi
2007-01-04 9:33 ` Kai Svahn
0 siblings, 1 reply; 2+ messages in thread
From: Raghunandan Dhongadi @ 2007-01-04 6:46 UTC (permalink / raw)
To: linux-omap-open-source
Hello All,
I have a OMAP2430 SDP. I am lookinf out for a AIC23 codec driver that
is implemented on the DSP core (C64x+), is there some reference code
available either on C5x ?
Warm Regards,
Raghu.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: AIC23 Codec Driver for DSP/BIOS
2007-01-04 6:46 AIC23 Codec Driver for DSP/BIOS Raghunandan Dhongadi
@ 2007-01-04 9:33 ` Kai Svahn
0 siblings, 0 replies; 2+ messages in thread
From: Kai Svahn @ 2007-01-04 9:33 UTC (permalink / raw)
To: ext Raghunandan Dhongadi; +Cc: linux-omap-open-source
Hello,
ext Raghunandan Dhongadi wrote:
> Hello All,
>
> I have a OMAP2430 SDP. I am lookinf out for a AIC23 codec driver that
> is implemented on the DSP core (C64x+), is there some reference code
> available either on C5x ?
>
In my understanding such driver do not exist, not at least publicly. The
HW codec initializations has been done on MPU side and then the SW
codecs ran on DSP. Also the needed channels depending if EAC or McBSP
has been used has been initialized either in MPU or DSP (certain McBSP
case) side.
Cheers,
Kai
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-01-04 9:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-04 6:46 AIC23 Codec Driver for DSP/BIOS Raghunandan Dhongadi
2007-01-04 9:33 ` Kai Svahn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox