* [PATCH] ARM: OMAP: Make board-palmz71 compile again
@ 2007-01-04 18:06 Dirk Behme
2007-01-09 23:29 ` Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Dirk Behme @ 2007-01-04 18:06 UTC (permalink / raw)
To: linux-omap-open-source
[-- Attachment #1: Type: text/plain, Size: 108 bytes --]
ARM: OMAP: Fix compilation issues in board-palmz71.c
Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
[-- Attachment #2: board_palmz71_fix.txt --]
[-- Type: text/plain, Size: 1040 bytes --]
Index: linux-osk/arch/arm/mach-omap1/board-palmz71.c
===================================================================
--- linux-osk.orig/arch/arm/mach-omap1/board-palmz71.c
+++ linux-osk/arch/arm/mach-omap1/board-palmz71.c
@@ -260,7 +260,6 @@ static struct spi_board_info __initdata
* 26 /* command + data + overhead */,
.bus_num = 2,
.chip_select = 0,
- }
} };
static struct omap_usb_config palmz71_usb_config __initdata = {
@@ -295,7 +294,7 @@ static struct omap_board_config_kernel p
};
static irqreturn_t
-palmz71_powercable(int irq, void *dev_id, struct pt_regs *regs)
+palmz71_powercable(int irq, void *dev_id)
{
if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
printk(KERN_INFO "PM: Power cable connected\n");
@@ -347,7 +346,7 @@ palmz71_gpio_setup(int early)
"palmz71-cable", 0))
printk(KERN_ERR
"IRQ request for power cable failed!\n");
- palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
+ palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
}
}
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: OMAP: Make board-palmz71 compile again
2007-01-04 18:06 [PATCH] ARM: OMAP: Make board-palmz71 compile again Dirk Behme
@ 2007-01-09 23:29 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2007-01-09 23:29 UTC (permalink / raw)
To: Dirk Behme; +Cc: linux-omap-open-source
* Dirk Behme <dirk.behme@googlemail.com> [070104 10:07]:
>
> ARM: OMAP: Fix compilation issues in board-palmz71.c
>
> Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
>
> Index: linux-osk/arch/arm/mach-omap1/board-palmz71.c
> ===================================================================
> --- linux-osk.orig/arch/arm/mach-omap1/board-palmz71.c
> +++ linux-osk/arch/arm/mach-omap1/board-palmz71.c
> @@ -260,7 +260,6 @@ static struct spi_board_info __initdata
> * 26 /* command + data + overhead */,
> .bus_num = 2,
> .chip_select = 0,
> - }
> } };
>
> static struct omap_usb_config palmz71_usb_config __initdata = {
> @@ -295,7 +294,7 @@ static struct omap_board_config_kernel p
> };
>
> static irqreturn_t
> -palmz71_powercable(int irq, void *dev_id, struct pt_regs *regs)
> +palmz71_powercable(int irq, void *dev_id)
> {
> if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
> printk(KERN_INFO "PM: Power cable connected\n");
> @@ -347,7 +346,7 @@ palmz71_gpio_setup(int early)
> "palmz71-cable", 0))
> printk(KERN_ERR
> "IRQ request for power cable failed!\n");
> - palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
> + palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
> }
> }
Pushing today.
Tony
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-01-09 23:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-04 18:06 [PATCH] ARM: OMAP: Make board-palmz71 compile again Dirk Behme
2007-01-09 23:29 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox