* display for osk5912 boards ?
@ 2007-05-09 6:44 Zaheer
2007-05-09 10:47 ` Kipisz, Steven
0 siblings, 1 reply; 5+ messages in thread
From: Zaheer @ 2007-05-09 6:44 UTC (permalink / raw)
To: linux-omap-open-source
Hi,
I have a Omap5912-OSK board without a display.
I would like to know if any one out there has been able to connect a
Dispay to the OSK and run any GUI applications on it.
I would also like to know if there are any vendors who can provide me
with a display which works with OSK5912 boards.
What effort will it take to enable the display in the 2.6 kernel ?
Thanks and Warm Regards,
Zaheer.
DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: display for osk5912 boards ?
2007-05-09 6:44 display for osk5912 boards ? Zaheer
@ 2007-05-09 10:47 ` Kipisz, Steven
2007-05-09 16:31 ` Dirk Behme
0 siblings, 1 reply; 5+ messages in thread
From: Kipisz, Steven @ 2007-05-09 10:47 UTC (permalink / raw)
To: Zaheer, linux-omap-open-source
Mistral sells a fairly expensive QVGA LCD with touchscreen
http://www.mistralsoftware.com/html/product/omap_products/products-omap5
912_starterkit.php.
There is already support in the 2.6 kernels for this.
Steve K.
-----Original Message-----
From: linux-omap-open-source-bounces@linux.omap.com
[mailto:linux-omap-open-source-bounces@linux.omap.com] On Behalf Of
Zaheer
Sent: Wednesday, May 09, 2007 1:44 AM
To: linux-omap-open-source@linux.omap.com
Subject: display for osk5912 boards ?
Hi,
I have a Omap5912-OSK board without a display.
I would like to know if any one out there has been able to connect a
Dispay to the OSK and run any GUI applications on it.
I would also like to know if there are any vendors who can provide me
with a display which works with OSK5912 boards.
What effort will it take to enable the display in the 2.6 kernel ?
Thanks and Warm Regards,
Zaheer.
DISCLAIMER:
This message (including attachment if any) is confidential and may be
privileged. Before opening attachments please check them for viruses and
defects. MindTree Consulting Limited (MindTree) will not be responsible
for any viruses or defects or any forwarded attachments emanating either
from within MindTree or outside. If you have received this message by
mistake please notify the sender by return e-mail and delete this
message from your system. Any unauthorized use or dissemination of this
message in whole or in part is strictly prohibited. Please note that
e-mails are susceptible to change and MindTree shall not be liable for
any improper, untimely or incomplete transmission.
_______________________________________________
Linux-omap-open-source mailing list
Linux-omap-open-source@linux.omap.com
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: display for osk5912 boards ?
2007-05-09 10:47 ` Kipisz, Steven
@ 2007-05-09 16:31 ` Dirk Behme
2007-05-10 3:50 ` Zaheer
0 siblings, 1 reply; 5+ messages in thread
From: Dirk Behme @ 2007-05-09 16:31 UTC (permalink / raw)
To: Zaheer; +Cc: linux-omap-open-source
Kipisz, Steven wrote:
> Mistral sells a fairly expensive QVGA LCD with touchscreen
> http://www.mistralsoftware.com/html/product/omap_products/products-omap5
> 912_starterkit.php.
And there is an "Aditec Graphic LCD Module (AGLM)". See
http://tree.celinuxforum.org/CelfPubWiki/OSK
Dirk
> -----Original Message-----
> From: linux-omap-open-source-bounces@linux.omap.com
> [mailto:linux-omap-open-source-bounces@linux.omap.com] On Behalf Of
> Zaheer
> Sent: Wednesday, May 09, 2007 1:44 AM
> To: linux-omap-open-source@linux.omap.com
> Subject: display for osk5912 boards ?
>
> Hi,
>
> I have a Omap5912-OSK board without a display.
> I would like to know if any one out there has been able to connect a
> Dispay to the OSK and run any GUI applications on it.
> I would also like to know if there are any vendors who can provide me
> with a display which works with OSK5912 boards.
> What effort will it take to enable the display in the 2.6 kernel ?
>
> Thanks and Warm Regards,
> Zaheer.
>
>
> DISCLAIMER:
> This message (including attachment if any) is confidential and may be
> privileged. Before opening attachments please check them for viruses and
> defects. MindTree Consulting Limited (MindTree) will not be responsible
> for any viruses or defects or any forwarded attachments emanating either
> from within MindTree or outside. If you have received this message by
> mistake please notify the sender by return e-mail and delete this
> message from your system. Any unauthorized use or dissemination of this
> message in whole or in part is strictly prohibited. Please note that
> e-mails are susceptible to change and MindTree shall not be liable for
> any improper, untimely or incomplete transmission.
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: display for osk5912 boards ?
2007-05-09 16:31 ` Dirk Behme
@ 2007-05-10 3:50 ` Zaheer
2007-05-10 6:33 ` AndyLu
0 siblings, 1 reply; 5+ messages in thread
From: Zaheer @ 2007-05-10 3:50 UTC (permalink / raw)
To: Dirk Behme; +Cc: linux-omap-open-source
Hello All,
I went through these links before, and did not find it to be affordable.
I am looking out for some non-expensive displays.
I would like to know if any one has used any other displays.
Any one knows which displays other than the below mentioned are
supported on the OSK5912 boards.
Warm Regards,
Zaheer.
Dirk Behme wrote:
> Kipisz, Steven wrote:
>> Mistral sells a fairly expensive QVGA LCD with touchscreen
>> http://www.mistralsoftware.com/html/product/omap_products/products-omap5
>> 912_starterkit.php.
>
> And there is an "Aditec Graphic LCD Module (AGLM)". See
>
> http://tree.celinuxforum.org/CelfPubWiki/OSK
>
> Dirk
>
>> -----Original Message-----
>> From: linux-omap-open-source-bounces@linux.omap.com
>> [mailto:linux-omap-open-source-bounces@linux.omap.com] On Behalf Of
>> Zaheer
>> Sent: Wednesday, May 09, 2007 1:44 AM
>> To: linux-omap-open-source@linux.omap.com
>> Subject: display for osk5912 boards ?
>>
>> Hi,
>>
>> I have a Omap5912-OSK board without a display.
>> I would like to know if any one out there has been able to connect a
>> Dispay to the OSK and run any GUI applications on it.
>> I would also like to know if there are any vendors who can provide me
>> with a display which works with OSK5912 boards.
>> What effort will it take to enable the display in the 2.6 kernel ?
>>
>> Thanks and Warm Regards,
>> Zaheer.
>>
>>
>> DISCLAIMER:
>> This message (including attachment if any) is confidential and may be
>> privileged. Before opening attachments please check them for viruses and
>> defects. MindTree Consulting Limited (MindTree) will not be responsible
>> for any viruses or defects or any forwarded attachments emanating either
>> from within MindTree or outside. If you have received this message by
>> mistake please notify the sender by return e-mail and delete this
>> message from your system. Any unauthorized use or dissemination of this
>> message in whole or in part is strictly prohibited. Please note that
>> e-mails are susceptible to change and MindTree shall not be liable for
>> any improper, untimely or incomplete transmission.
>> _______________________________________________
>> Linux-omap-open-source mailing list
>> Linux-omap-open-source@linux.omap.com
>> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>> _______________________________________________
>> Linux-omap-open-source mailing list
>> Linux-omap-open-source@linux.omap.com
>> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>>
>
DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: display for osk5912 boards ?
2007-05-10 3:50 ` Zaheer
@ 2007-05-10 6:33 ` AndyLu
0 siblings, 0 replies; 5+ messages in thread
From: AndyLu @ 2007-05-10 6:33 UTC (permalink / raw)
To: 'Zaheer', 'Dirk Behme'; +Cc: linux-omap-open-source
Dear All,
I had full schematic and Linux drivers for this display board.
Please ask me if you want ,full free.
Best regards
Andy.Lu
(Lu ZhiQing)
-----Original Message-----
From: linux-omap-open-source-bounces@linux.omap.com
[mailto:linux-omap-open-source-bounces@linux.omap.com] On Behalf Of Zaheer
Sent: May 10, 2007 11:51 AM
To: Dirk Behme
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: display for osk5912 boards ?
Hello All,
I went through these links before, and did not find it to be affordable.
I am looking out for some non-expensive displays.
I would like to know if any one has used any other displays.
Any one knows which displays other than the below mentioned are supported on
the OSK5912 boards.
Warm Regards,
Zaheer.
Dirk Behme wrote:
> Kipisz, Steven wrote:
>> Mistral sells a fairly expensive QVGA LCD with touchscreen
>> http://www.mistralsoftware.com/html/product/omap_products/products-om
>> ap5
>> 912_starterkit.php.
>
> And there is an "Aditec Graphic LCD Module (AGLM)". See
>
> http://tree.celinuxforum.org/CelfPubWiki/OSK
>
> Dirk
>
>> -----Original Message-----
>> From: linux-omap-open-source-bounces@linux.omap.com
>> [mailto:linux-omap-open-source-bounces@linux.omap.com] On Behalf Of
>> Zaheer
>> Sent: Wednesday, May 09, 2007 1:44 AM
>> To: linux-omap-open-source@linux.omap.com
>> Subject: display for osk5912 boards ?
>>
>> Hi,
>>
>> I have a Omap5912-OSK board without a display.
>> I would like to know if any one out there has been able to connect a
>> Dispay to the OSK and run any GUI applications on it.
>> I would also like to know if there are any vendors who can provide me
>> with a display which works with OSK5912 boards.
>> What effort will it take to enable the display in the 2.6 kernel ?
>>
>> Thanks and Warm Regards,
>> Zaheer.
>>
>>
>> DISCLAIMER:
>> This message (including attachment if any) is confidential and may be
>> privileged. Before opening attachments please check them for viruses
>> and defects. MindTree Consulting Limited (MindTree) will not be
>> responsible for any viruses or defects or any forwarded attachments
>> emanating either from within MindTree or outside. If you have
>> received this message by mistake please notify the sender by return
>> e-mail and delete this message from your system. Any unauthorized use
>> or dissemination of this message in whole or in part is strictly
>> prohibited. Please note that e-mails are susceptible to change and
>> MindTree shall not be liable for any improper, untimely or incomplete
transmission.
>> _______________________________________________
>> Linux-omap-open-source mailing list
>> Linux-omap-open-source@linux.omap.com
>> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>> _______________________________________________
>> Linux-omap-open-source mailing list
>> Linux-omap-open-source@linux.omap.com
>> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>>
>
DISCLAIMER:
This message (including attachment if any) is confidential and may be
privileged. Before opening attachments please check them for viruses and
defects. MindTree Consulting Limited (MindTree) will not be responsible for
any viruses or defects or any forwarded attachments emanating either from
within MindTree or outside. If you have received this message by mistake
please notify the sender by return e-mail and delete this message from your
system. Any unauthorized use or dissemination of this message in whole or in
part is strictly prohibited. Please note that e-mails are susceptible to
change and MindTree shall not be liable for any improper, untimely or
incomplete transmission.
_______________________________________________
Linux-omap-open-source mailing list
Linux-omap-open-source@linux.omap.com
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-05-10 6:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-09 6:44 display for osk5912 boards ? Zaheer
2007-05-09 10:47 ` Kipisz, Steven
2007-05-09 16:31 ` Dirk Behme
2007-05-10 3:50 ` Zaheer
2007-05-10 6:33 ` AndyLu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox