public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@nokia.com>
To: ext Trilok Soni <soni.trilok@gmail.com>
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: [PATCH 1/2] ARM: OMAP2: Camera: Add driver.
Date: Thu, 23 Aug 2007 15:51:37 +0300	[thread overview]
Message-ID: <46CD82D9.3070708@nokia.com> (raw)
In-Reply-To: <5d5443650708211008x11d022b6qe513e75c6aa56585@mail.gmail.com>

ext Trilok Soni wrote:
> Hi Sakari,

Hello Trilok,

>> +       switch (p.if_type) {
>> +       case V4L2_IF_TYPE_PARALLEL:
>> +               if (p.u.parallel.frame_start_on_rising_vs)
>> +                       cam->cc_ctrl |= CC_CTRL_NOBT_SYNCHRO;
>> +               if (p.u.parallel.bt_sync_correct)
>> +                       cam->cc_ctrl |= CC_CTRL_BT_CORRECT;
>> +               if (p.u.parallel.swap)
>> +                       cam->cc_ctrl |= CC_CTRL_PAR_ORDERCAM;
> 
> In case of earlier omap2 camera driver with ov9640 combination above bit was
> set based on the pixelformat being passed. I am just copying that code here.
> 
> -----------------------snip-------------------------------------
>         switch (pix->pixelformat) {
>         case V4L2_PIX_FMT_UYVY:
>         case V4L2_PIX_FMT_RGB565:
>         case V4L2_PIX_FMT_RGB555:
>         default:
>                 /* These formats need a 16-bit byte swap */
>                 cam->cc_ctrl |= CC_CTRL_PAR_ORDERCAM;
>         case V4L2_PIX_FMT_YUYV:
>         case V4L2_PIX_FMT_RGB565X:
>         case V4L2_PIX_FMT_RGB555X:
>                 /* These formats don't need a 16-bit byte swap */
>                 break;
>         }

Ah. I didn't anticipate this... Then probably the camera driver needs to 
call g_ifparm always after s_fmt_cap.

> So, we might need to add support for above also.
> 
>> +               if (p.u.parallel.latch_clk_inv)
>> +                       cam->cc_ctrl |= CC_CTRL_PAR_CLK_POL;
>> +               if (p.u.parallel.nobt_hs_inv)
>> +                       cam->cc_ctrl |= CC_CTRL_NOBT_HS_POL;
>> +               if (p.u.parallel.nobt_hs_inv)
> 
> Above should be nobt_vs_inv instead :)

You got me convinced. :)

> I have updated ov9640 driver with the changes you have suggested and
> with new "ifparm" bits, but ov9640 on H4 is still not working. I will
> post that incremental patches for ov9640, so that someone can debug on
> H4/OMAP1(once that core gets converted to this new interface).

Ok.

-- 
Sakari Ailus
sakari.ailus@nokia.com

  reply	other threads:[~2007-08-23 12:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-20 12:02 [PATCH 0/2] Updated OMAP 2 camera driver and N800 platform camera patches Sakari Ailus
2007-08-20 12:03 ` [PATCH 1/2] ARM: OMAP2: Camera: Add driver Sakari Ailus
2007-08-20 12:03   ` [PATCH 2/2] ARM: N800: Add hardware dependent parts for camera / sensor Sakari Ailus
2007-08-21 17:08   ` [PATCH 1/2] ARM: OMAP2: Camera: Add driver Trilok Soni
2007-08-23 12:51     ` Sakari Ailus [this message]
2007-08-20 16:59 ` [PATCH 0/2] Updated OMAP 2 camera driver and N800 platform camera patches Trilok Soni
2007-08-31 20:27   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46CD82D9.3070708@nokia.com \
    --to=sakari.ailus@nokia.com \
    --cc=linux-omap-open-source@linux.omap.com \
    --cc=soni.trilok@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox