[PATCH 0/14] MMC: OMAP: Add MMC multislot support

[PATCH 0/14] MMC: OMAP: Add MMC multislot support

[Carlos Aguiar]

Hi Tony and folks,

This is the latest 'MMC: OMAP: Add MMC multislot support' patch series
with changes, corrections and improvements based on comments and
suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.

Just to remind you, this patch series adds the MMC multislot support for
N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's
earlier implementation and it can be applied against most updated
linux-omap tree (2.6.23-rc6-omap1).

I've tested with MMC, SD and SDHC cards and looks fine for the boards
mentioned above.

Testing, comments and suggestions are welcome.

BR,

Carlos.

-- 
Carlos Eduardo Aguiar
Nokia Institute of Technology - INdT
Open Source Mobile Research Center - OSMRC - Manaus
Core Team
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: carlos.aguiar@indt.org.br

Re: [PATCH 0/14] MMC: OMAP: Add MMC multislot support

[Tony Lindgren]

* Carlos Aguiar <carlos.aguiar@indt.org.br> [070920 08:04]:
> Hi Tony and folks,
> 
> This is the latest 'MMC: OMAP: Add MMC multislot support' patch series
> with changes, corrections and improvements based on comments and
> suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.
> 
> Just to remind you, this patch series adds the MMC multislot support for
> N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's
> earlier implementation and it can be applied against most updated
> linux-omap tree (2.6.23-rc6-omap1).
> 
> I've tested with MMC, SD and SDHC cards and looks fine for the boards
> mentioned above.
> 
> Testing, comments and suggestions are welcome.

Any news on using these patches on 1510? There are several 15xx based
boards where the only root is MMC, so we should make sure it works on
15xx before applying these.

Regards,

Tony

Re: [PATCH 0/14] MMC: OMAP: Add MMC multislot support

[Carlos Aguiar]

ext Tony Lindgren wrote:
> * Carlos Aguiar <carlos.aguiar@indt.org.br> [070920 08:04]:
>   
>> Hi Tony and folks,
>>
>> This is the latest 'MMC: OMAP: Add MMC multislot support' patch series
>> with changes, corrections and improvements based on comments and
>> suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.
>>
>> Just to remind you, this patch series adds the MMC multislot support for
>> N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's
>> earlier implementation and it can be applied against most updated
>> linux-omap tree (2.6.23-rc6-omap1).
>>
>> I've tested with MMC, SD and SDHC cards and looks fine for the boards
>> mentioned above.
>>
>> Testing, comments and suggestions are welcome.
>>     
>
>   
Hi Tony,
> Any news on using these patches on 1510? There are several 15xx based
> boards where the only root is MMC, so we should make sure it works on
> 15xx before applying these.
>   
I'm working now with an Innovator 1510 in order to provide such support
to this board.

I've already implemented a version for Siemens SX1 (1510 based). Today
I'll send to Vladimir Ananiev and Pavel Machek (as I remember, they
provided the MMC support on linux-omap tree) to test it. I have no such
boards here.

As soon as the support is working on 1510 I'll send the patches to you
and Linux-OMAP mailing list.

BR,

Carlos.
> Regards,
>
> Tony
>
>   


-- 
Carlos Eduardo Aguiar
Nokia Institute of Technology - INdT
Open Source Mobile Research Center - OSMRC - Manaus
Core Team
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: carlos.aguiar@indt.org.br