From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: omap-linux <linux-omap-open-source@linux.omap.com>
Subject: [PATCH 05/17] MMC: OMAP: General cleanup for MMC multislot support
Date: Mon, 26 Nov 2007 12:01:22 -0400 [thread overview]
Message-ID: <474AEDD2.6020005@indt.org.br> (raw)
From: Juha Yrjola <juha.yrjola@solidboot.com>
General code cleanup, modifications at some dev_* functions and
other hacks at mmc_omap_irq() for MMC multislot support.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
---
drivers/mmc/host/omap.c | 52 ++++++++++++++++++++++++++++-------------------
1 files changed, 31 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index ba409e4..e7e3fd6 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -563,11 +563,12 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
u16 status;
int end_command;
int end_transfer;
- int transfer_error;
+ int transfer_error, cmd_error;
if (host->cmd == NULL && host->data == NULL) {
status = OMAP_MMC_READ(host, STAT);
- dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+ dev_info(mmc_dev(host->slots[0]->mmc),
+ "Spurious IRQ 0x%04x\n", status);
if (status != 0) {
OMAP_MMC_WRITE(host, STAT, status);
OMAP_MMC_WRITE(host, IE, 0);
@@ -578,12 +579,19 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
end_command = 0;
end_transfer = 0;
transfer_error = 0;
+ cmd_error = 0;
while ((status = OMAP_MMC_READ(host, STAT)) != 0) {
+ int cmd;
+
OMAP_MMC_WRITE(host, STAT, status);
+ if (host->cmd != NULL)
+ cmd = host->cmd->opcode;
+ else
+ cmd = -1;
#ifdef CONFIG_MMC_DEBUG
dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
- status, host->cmd != NULL ? host->cmd->opcode : -1);
+ status, cmd);
mmc_omap_report_irq(status);
printk("\n");
#endif
@@ -595,12 +603,12 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
mmc_omap_xfer_data(host, 1);
}
- if (status & OMAP_MMC_STAT_END_OF_DATA) {
+ if (status & OMAP_MMC_STAT_END_OF_DATA)
end_transfer = 1;
- }
if (status & OMAP_MMC_STAT_DATA_TOUT) {
- dev_dbg(mmc_dev(host->mmc), "data timeout\n");
+ dev_dbg(mmc_dev(host->mmc), "data timeout (CMD%d)\n",
+ cmd);
if (host->data) {
host->data->error = -ETIMEDOUT;
transfer_error = 1;
@@ -625,16 +633,16 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
struct mmc_omap_slot *slot =
host->current_slot;
if (host->cmd->opcode != MMC_ALL_SEND_CID &&
- host->cmd->opcode !=
- MMC_SEND_OP_COND &&
- host->cmd->opcode !=
- MMC_APP_CMD &&
- !mmc_omap_cover_is_open(slot))
+ host->cmd->opcode != MMC_SEND_OP_COND &&
+ host->cmd->opcode != MMC_APP_CMD &&
+ (slot == NULL ||
+ !mmc_omap_cover_is_open(slot)))
dev_err(mmc_dev(host->mmc),
- "command timeout, CMD %d\n",
- host->cmd->opcode);
+ "command timeout (CMD%d)\n",
+ cmd);
host->cmd->error = -ETIMEDOUT;
end_command = 1;
+ cmd_error = 1;
}
}
@@ -642,9 +650,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
if (host->cmd) {
dev_err(mmc_dev(host->mmc),
"command CRC error (CMD%d, arg 0x%08x)\n",
- host->cmd->opcode, host->cmd->arg);
+ cmd, host->cmd->arg);
host->cmd->error = -EILSEQ;
end_command = 1;
+ cmd_error = 1;
} else
dev_err(mmc_dev(host->mmc),
"command CRC error without cmd?\n");
@@ -653,13 +662,13 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
if (status & OMAP_MMC_STAT_CARD_ERR) {
dev_dbg(mmc_dev(host->mmc),
"ignoring card status error (CMD%d)\n",
- host->cmd->opcode);
+ cmd);
end_command = 1;
}
/*
* NOTE: On 1610 the END_OF_CMD may come too early when
- * starting a write
+ * starting a write
*/
if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
(!(status & OMAP_MMC_STAT_A_EMPTY))) {
@@ -667,13 +676,14 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
}
}
- if (end_command) {
+ if (end_command)
mmc_omap_cmd_done(host, host->cmd);
+ if (host->data != NULL) {
+ if (transfer_error)
+ mmc_omap_xfer_done(host, host->data);
+ else if (end_transfer)
+ mmc_omap_end_of_data(host, host->data);
}
- if (transfer_error)
- mmc_omap_xfer_done(host, host->data);
- else if (end_transfer)
- mmc_omap_end_of_data(host, host->data);
return IRQ_HANDLED;
}
-- 1.5.3.GIT
reply other threads:[~2007-11-26 16:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=474AEDD2.6020005@indt.org.br \
--to=carlos.aguiar@indt.org.br \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox