From: Steve Poulsen <spoulsen@css-design.us>
To: kathirvel nachimuthu <use.kathir@yahoo.co.in>
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: omap flash programming
Date: Mon, 03 Dec 2007 23:28:30 -0600 [thread overview]
Message-ID: <4754E57E.5090306@css-design.us> (raw)
In-Reply-To: <851794.82307.qm@web7711.mail.in.yahoo.com>
Kathir,
There are several ways to accomplish this. If your board has a working
u-boot flashed in it, then you can do it from the u-boot prompts via
kermit, or tftp.
If you don't have u-boot working yet, then I recommend the u-boot.out
file that comes on the CD. If you load it and run it, it should flash
u-boot into the system. Then you can use the kermit/tftp from u-boot to
flash your own bootloader. Another approach is the USB bootloader,
which will reflash a new u-boot into your board.
I strongly recommend you look at the OSK5912 newbie guide. Search for
this: "osk5912 newbie guide" on the web and you get an excellent
document that should help you accomplish what you need.
Steve Poulsen
Communication Systems Solutions
kathirvel nachimuthu wrote:
> hi,
> I am working with omap5912 based new development.
> how can flash my boot loader in to my target board.
> i have ccs version 3.1.
>
> thanks in advance
> kathir
>
>
>
> ---------------------------------
> Unlimited freedom, unlimited storage. Get it now
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>
>
next prev parent reply other threads:[~2007-12-04 5:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-04 4:47 omap flash programming kathirvel nachimuthu
2007-12-04 5:28 ` Steve Poulsen [this message]
2007-12-04 14:20 ` Hunter, Jon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4754E57E.5090306@css-design.us \
--to=spoulsen@css-design.us \
--cc=linux-omap-open-source@linux.omap.com \
--cc=use.kathir@yahoo.co.in \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox