From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steve Poulsen Subject: Re: omap flash programming Date: Mon, 03 Dec 2007 23:28:30 -0600 Message-ID: <4754E57E.5090306@css-design.us> References: <851794.82307.qm@web7711.mail.in.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <851794.82307.qm@web7711.mail.in.yahoo.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: kathirvel nachimuthu Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org Kathir, There are several ways to accomplish this. If your board has a working u-boot flashed in it, then you can do it from the u-boot prompts via kermit, or tftp. If you don't have u-boot working yet, then I recommend the u-boot.out file that comes on the CD. If you load it and run it, it should flash u-boot into the system. Then you can use the kermit/tftp from u-boot to flash your own bootloader. Another approach is the USB bootloader, which will reflash a new u-boot into your board. I strongly recommend you look at the OSK5912 newbie guide. Search for this: "osk5912 newbie guide" on the web and you get an excellent document that should help you accomplish what you need. Steve Poulsen Communication Systems Solutions kathirvel nachimuthu wrote: > hi, > I am working with omap5912 based new development. > how can flash my boot loader in to my target board. > i have ccs version 3.1. > > thanks in advance > kathir > > > > --------------------------------- > Unlimited freedom, unlimited storage. Get it now > _______________________________________________ > Linux-omap-open-source mailing list > Linux-omap-open-source@linux.omap.com > http://linux.omap.com/mailman/listinfo/linux-omap-open-source > >