Re: [PATCH 1/2] OMAP Security HW accel: Adding base address and interruption on header files.

Anderson Briglia
2007-12-11T15:10:26Z

Hi David,

I just tested and it is working fine.

Acked-by: Anderson Briglia <anderson.briglia@indt.org.br>

ext David Cohen wrote:
> This patch adds the base address and interruption on header files for the
> OMAP security hw module acceleration.
>
> Signed-off-by: David Cohen <david.cohen@indt.org.br>
> ---
> include/asm-arm/arch-omap/irqs.h | 2 ++
> include/asm-arm/arch-omap/omap16xx.h | 5 +++++
> include/asm-arm/arch-omap/omap24xx.h | 8 ++++++++
> 3 files changed, 15 insertions(+), 0 deletions(-)
>
> diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
> index ec58dfd..1242696 100644
> --- a/include/asm-arm/arch-omap/irqs.h
> +++ b/include/asm-arm/arch-omap/irqs.h
> @@ -177,6 +177,7 @@
> #define INT_1610_DMA_CH14 (61 + IH2_BASE)
> #define INT_1610_DMA_CH15 (62 + IH2_BASE)
> #define INT_1610_NAND (63 + IH2_BASE)
> +#define INT_1610_SHA1MD5 (91 + IH2_BASE)
>
> /*
> * OMAP-730 specific IRQ numbers for interrupt handler 2
> @@ -264,6 +265,7 @@
> #define INT_24XX_GPTIMER10 46
> #define INT_24XX_GPTIMER11 47
> #define INT_24XX_GPTIMER12 48
> +#define INT_24XX_SHA1MD5 51
> #define INT_24XX_I2C1_IRQ 56
> #define INT_24XX_I2C2_IRQ 57
> #define INT_24XX_HDQ_IRQ 58
> diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
> index db85276..d576e59 100644
> --- a/include/asm-arm/arch-omap/omap16xx.h
> +++ b/include/asm-arm/arch-omap/omap16xx.h
> @@ -44,6 +44,11 @@
> #define OMAP16XX_DSPREG_SIZE SZ_128K
> #define OMAP16XX_DSPREG_START 0xE1000000
>
> +#define OMAP16XX_SEC_BASE 0xFFFE4000
> +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
> +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
> +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
> +
> /*
> * ---------------------------------------------------------------------------
> * Interrupts
> diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
> index adc89a8..3d6673d 100644
> --- a/include/asm-arm/arch-omap/omap24xx.h
> +++ b/include/asm-arm/arch-omap/omap24xx.h
> @@ -48,6 +48,7 @@
> #define OMAP2420_PRM_BASE OMAP2420_CM_BASE
> #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
> #define OMAP2420_SMS_BASE 0x68008000
> +#define OMAP2420_SEC_BASE (L4_24XX_BASE + 0xA0000)
>
> #define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
> #define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
> @@ -77,6 +78,13 @@
> /* Camera */
> #define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
>
> +/* Security */
> +#define OMAP2420_SEC_RNG_BASE (OMAP2420_SEC_BASE + 0x0000)
> +#define OMAP2420_SEC_DES_BASE (OMAP2420_SEC_BASE + 0x2000)
> +#define OMAP2420_SEC_SHA1MD5_BASE (OMAP2420_SEC_BASE + 0x4000)
> +#define OMAP2420_SEC_AES_BASE (OMAP2420_SEC_BASE + 0x6000)
> +#define OMAP2420_SEC_PKA_BASE (OMAP2420_SEC_BASE + 0x8000)
> +
> #if defined(CONFIG_ARCH_OMAP2420)
>
> #define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE