From mboxrd@z Thu Jan 1 00:00:00 1970 From: Francisco Alecrim Subject: Re: Copying executables into H2 board Date: Tue, 08 Jan 2008 21:18:32 -0400 Message-ID: <478420E8.3090700@indt.org.br> References: <99165b620801081120j2e1b70e0xe12e2fb4f5b528dc@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <99165b620801081120j2e1b70e0xe12e2fb4f5b528dc@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: ext Phanee Sistla Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org ext Phanee Sistla wrote: > I have the linux 2.6.9 kernel up and running on the OMAP1610 H2 board. > Booting the kernel from H2 board generates the follwoing o/p on the minicom > terminal: > > > MUX: Setting register MMC_DAT0 > FUNC_MUX_CTRL_B (0xfffe1030) = 0x00000000 -> 0x00000000 > PU_PD_SEL_2 (0xfffe10bc) = 0x0041f000 -> 0x0041f000 > PULL_DWN_CTRL_2 (0xfffe1048) = 0x00000410 -> 0x00000410 > > MMC card not present > MMC1: Unable to get IRQ for MMC cover switch > OMAP16XX TSC2101 Audio support initialized > NET: Registered protocol family 2 > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 2048 bind 4096) > NET: Registered protocol family 1 > NET: Registered protocol family 17 > eth0: link up > Sending DHCP requests ., OK > IP-Config: Got DHCP answer from 129.119.113.107, my address is > 129.119.126.126 > IP-Config: Complete: > device=eth0, addr=129.119.126.126, mask=255.255.255.0, gw= > 129.119.126.1, > host= 129.119.126.126, domain=seas.smu.edu, nis-domain=(none), > bootserver=129.119.113.107, rootserver=129.119.124.64 , rootpath=<7> > evbug.c: Event. Dev: , Type: 1, Code: 184, Value: 2 > Looking up port of RPC 100003/2 on 129.119.124.64 > Looking up port of RPC 100005/1 on 129.119.124.64 > VFS: Mounted root (nfs filesystem). > Mounted devfs on /dev > Freeing init memory: 104K > init started: BusyBox v1.00-pre8 (2004.03.05-22:18+0000) multi-call binary > > ****************************************** > Starting System Init for innovator > ****************************************** > > Please press Enter to activate this console. > > > The target board has a root file system that is NFS mounted from the host > pc. The file system is the host machine. Put the "Helloworld" in the directory exported by NFS. :) > I tried to run a simple c program " Helloworld.c" from the H2 board. For > this I cross compiled the source code using snapgear toolchain. This > generated an executable "Helloworld". I dont know how to load this > executable into the H2 board. Kindly help me in this regard. > > Thanking you in advance, > Phanee > _______________________________________________ > Linux-omap-open-source mailing list > Linux-omap-open-source@linux.omap.com > http://linux.omap.com/mailman/listinfo/linux-omap-open-source > > -- Francisco Keppler Silva Alecrim INdT - OSMRC - Manaus Core team Tel : (+55 92) 2126 1017 Mobile: (+55 92) 9198 4214 Skype : keppleralecrim Jabber: alecrim@gmail.com