Re: [RFC/PATH] OMAP: HSMMC: Fixes for 1.8V MMC2 interface

[Francisco Alecrim <francisco.alecrim@indt.org.br>]

ext Seth Forshee wrote:
> On Tue, Apr 01, 2008 at 08:44:47PM +0530, Madhusudhan Chikkature Rajashekar wrote:
>   
>> Hi,
>>
>> I did not see any board level code to power up the second slot along with this patch.
>> Where is the code that enables 1.8V to the second slot?
>>     
>
> I am working with a custom board that isn't supported in the git repo, and I
> don't have access to any other board that I could test such changes with.
> These are just the chages I found were necessary to support the 1.8V-only
> host, regardless of whatever board support is needed.

That's the same problem here!! I have a custom board too!! However, 
pushing patches [1] and [2] we will be able to enable the second 
controller with some modifications in board-sdp-mmc.c.

[1] - OMAP: HSMMC: Fixes for 1.8V MMC2 interface
[2] - [PATCH 1/1] PLAT: OMAP: Add device configuration to support second 
HSMMC slot on OMAP 2430 and 3430 boards.

-- 
Francisco Keppler Silva Alecrim - INdT
Phone: +55 92 2126-1017
Mobile: +55 92 9152-7000