From mboxrd@z Thu Jan 1 00:00:00 1970 From: Francisco Alecrim Subject: Re: [RFC/PATH] OMAP: HSMMC: Fixes for 1.8V MMC2 interface Date: Wed, 02 Apr 2008 03:46:44 +0300 Message-ID: <47F2D774.2060308@indt.org.br> References: <20080331014640.GA14188@ubuntu-workstation> <47F14D61.5030109@indt.org.br> <20080401005137.GA22520@ubuntu-workstation> <004901c8940b$20f1fca0$438918ac@ent.ti.com> <20080401161617.GA28624@ubuntu-workstation> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtp.nokia.com ([192.100.122.230]:54756 "EHLO mgw-mx03.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751886AbYDBAqz (ORCPT ); Tue, 1 Apr 2008 20:46:55 -0400 In-Reply-To: <20080401161617.GA28624@ubuntu-workstation> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Madhusudhan Chikkature Rajashekar , linux-omap@vger.kernel.org ext Seth Forshee wrote: > On Tue, Apr 01, 2008 at 08:44:47PM +0530, Madhusudhan Chikkature Rajashekar wrote: > >> Hi, >> >> I did not see any board level code to power up the second slot along with this patch. >> Where is the code that enables 1.8V to the second slot? >> > > I am working with a custom board that isn't supported in the git repo, and I > don't have access to any other board that I could test such changes with. > These are just the chages I found were necessary to support the 1.8V-only > host, regardless of whatever board support is needed. That's the same problem here!! I have a custom board too!! However, pushing patches [1] and [2] we will be able to enable the second controller with some modifications in board-sdp-mmc.c. [1] - OMAP: HSMMC: Fixes for 1.8V MMC2 interface [2] - [PATCH 1/1] PLAT: OMAP: Add device configuration to support second HSMMC slot on OMAP 2430 and 3430 boards. -- Francisco Keppler Silva Alecrim - INdT Phone: +55 92 2126-1017 Mobile: +55 92 9152-7000