* OMAP5912 AIC23 [not found] <65e025470808251004w109cece7t9caeaa81b422554b@mail.gmail.com> @ 2008-08-25 17:11 ` Yuri Jaeger Monti 2008-08-26 1:56 ` Steve Poulsen 0 siblings, 1 reply; 4+ messages in thread From: Yuri Jaeger Monti @ 2008-08-25 17:11 UTC (permalink / raw) To: linux-omap@vger.kernel.org Hi fellows, I tried everything I could to solve the buffer underrun error's while playing some audio in the OSK5912 with the AIC23, and I don't know what should I do anymore. I'm trying to simply output and audio file via the ARM, I think this should be ok but the audio is always choppy. Am I doing something wrong? Or perhaps should I use only the DSP processor to play the audio? (didn't tried this yet because I need the DSP to do other tasks). Cheers --- Yuri Jaeger Monti ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: OMAP5912 AIC23 2008-08-25 17:11 ` OMAP5912 AIC23 Yuri Jaeger Monti @ 2008-08-26 1:56 ` Steve Poulsen 2008-08-26 14:22 ` Yuri Jaeger Monti 0 siblings, 1 reply; 4+ messages in thread From: Steve Poulsen @ 2008-08-26 1:56 UTC (permalink / raw) To: Yuri Jaeger Monti; +Cc: linux-omap@vger.kernel.org Yuri, We have had good luck with ARM audio under this setup. We did write our own AIC23 drivers which we used directly from our application. We used a device entry (/dev/aic23) that hooked in our driver. We were able to open those in any application and play/record or both. The only possible problem was if we tried to do things like "cat file.pcm > /dev/aic23". Although this would work, some cases would not work due to those applications buffering schemes. For example, this was bad: "cat /dev/aic23 > /dev/aic23". It would work, but would be choppy. How are you playing audio? Steve Yuri Jaeger Monti wrote: > Hi fellows, > > I tried everything I could to solve the buffer underrun error's while > playing some audio in the OSK5912 with the AIC23, and I don't know > what should I do anymore. > I'm trying to simply output and audio file via the ARM, I think this > should be ok but the audio is always choppy. > Am I doing something wrong? Or perhaps should I use only the DSP > processor to play the audio? (didn't tried this yet because I need the > DSP to do other tasks). > > Cheers > > --- > Yuri Jaeger Monti > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: OMAP5912 AIC23 2008-08-26 1:56 ` Steve Poulsen @ 2008-08-26 14:22 ` Yuri Jaeger Monti 2008-08-28 17:02 ` Yuri Jaeger Monti 0 siblings, 1 reply; 4+ messages in thread From: Yuri Jaeger Monti @ 2008-08-26 14:22 UTC (permalink / raw) To: Steve Poulsen; +Cc: linux-omap@vger.kernel.org Thanks for your reply Steve! I'm using the AIC23 driver bundled in the OMAP kernel, I tried playing through OSS directly to /dev/dsp (which gives me the best results, choppy sound though) and through ALSA which is similar. Doing cat test.wav > /dev/dsp or /dev/audio just gives me noise output. And I still can't record anything. I've tried every player possible. Here is the output of aplay: root@DEA /opt/audios/wav # aplay -lL default:CARD=AIC23 OSK AIC23, omap alsa pcm Default Audio Device null Discard all samples (playback) or generate zero samples (capture) **** List of PLAYBACK Hardware Devices **** card 0: AIC23 [OSK AIC23], device 0: OMAP PCM [omap alsa pcm] Subdevices: 1/1 Subdevice #0: subdevice #0 root@DEA /opt/audios # aplay audio_44100_16PCM.au -vv Playing Sparc Audio 'audio_44100_16PCM.au' : Signed 16 bit Big Endian, Rate 44100 Hz, Stereo Plug PCM: Linear conversion PCM (S16_LE) Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_BE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 32768 period_size : 2048 period_time : 46439 tick_time : 0 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 2048 xfer_align : 2048 start_threshold : 32768 stop_threshold : 32768 silence_threshold: 0 silence_size : 0 boundary : 1073741824 Slave: Hardware PCM card 0 'OSK AIC23' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 32768 period_size : 2048 period_time : 46439 tick_time : 0 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 2048 xfer_align : 2048 start_threshold : 32768 stop_threshold : 32768 silence_threshold: 0 silence_size : 0 boundary : 1073741824 ############### +| 99%underrun!!! (at least 0.366 ms long) Status: state : XRUN trigger_time: 1217931313.815063477 tstamp : 1217931313.815307617 delay : 0 avail : 32768 avail_max : 32768 ############## +| 99%underrun!!! (at least 0.152 ms long) Status: state : XRUN trigger_time: 1217931314.353729248 tstamp : 1217931314.353851319 delay : 0 avail : 32768 avail_max : 32768 ##################################################+| 99%underrun!!! (at least 0.153 ms long) Status: state : XRUN trigger_time: 1217931314.892425537 tstamp : 1217931314.892547608 delay : 0 avail : 32768 avail_max : 32768 ##################################################+| 99%underrun!!! (at least 0.092 ms long) Status: state : XRUN trigger_time: 1217931315.467193604 tstamp : 1217931315.467254639 delay : 0 avail : 32768 avail_max : 32768 ############################### +| 99%underrun!!! (at least 0.092 ms long) Status: state : XRUN trigger_time: 1217931316.107543946 tstamp : 1217931316.107635498 delay : 0 avail : 34816 avail_max : 34816 ##################################################+| 99%underrun!!! (at least 0.091 ms long) Status: state : XRUN trigger_time: 1217931316.747711182 tstamp : 1217931316.747802735 delay : 0 avail : 34816 avail_max : 34816 ##################################################+| 99%underrun!!! (at least 0.122 ms long) Status: state : XRUN trigger_time: 1217931317.326873780 tstamp : 1217931317.326965332 delay : 0 avail : 32768 avail_max : 32768 ##DMA timeout with device 8#######################+| 99% {sound_dma_irq_handler}-ERROR: DCSR_ERROR! ##################################################+| 99% root@DEA /opt/audios/wav # aplay test.wav Playing WAVE 'test.wav' : Unsigned 8 bit, Rate 24000 Hz, Mono underrun!!! (at least 0.396 ms long) When playing a long audio file, there is a lot of underruns (XRUN). I've tried playing ogg files with ogg123, mp3 files with madplay and also tested with a lot of different sample rates and bitrates, always choppy sound (good quality but the audio looks like it's splitted into chunks, and sometimes it loops in the end). Do you have any hint? Thanks --- Yuri Jaeger Monti On Mon, Aug 25, 2008 at 10:56 PM, Steve Poulsen <spoulsen@css-design.us> wrote: > Yuri, > > We have had good luck with ARM audio under this setup. We did write our own > AIC23 drivers which we used directly from our application. We used a device > entry (/dev/aic23) that hooked in our driver. We were able to open those in > any application and play/record or both. The only possible problem was if > we tried to do things like "cat file.pcm > /dev/aic23". Although this would > work, some cases would not work due to those applications buffering schemes. > For example, this was bad: "cat /dev/aic23 > /dev/aic23". It would work, > but would be choppy. > How are you playing audio? > > Steve > > Yuri Jaeger Monti wrote: >> >> Hi fellows, >> >> I tried everything I could to solve the buffer underrun error's while >> playing some audio in the OSK5912 with the AIC23, and I don't know >> what should I do anymore. >> I'm trying to simply output and audio file via the ARM, I think this >> should be ok but the audio is always choppy. >> Am I doing something wrong? Or perhaps should I use only the DSP >> processor to play the audio? (didn't tried this yet because I need the >> DSP to do other tasks). >> >> Cheers >> >> --- >> Yuri Jaeger Monti >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: OMAP5912 AIC23 2008-08-26 14:22 ` Yuri Jaeger Monti @ 2008-08-28 17:02 ` Yuri Jaeger Monti 0 siblings, 0 replies; 4+ messages in thread From: Yuri Jaeger Monti @ 2008-08-28 17:02 UTC (permalink / raw) To: Steve Poulsen; +Cc: linux-omap@vger.kernel.org Steve, Would you mind to share with us the driver for the AIC23 you made? or the kernel configuration you used? Unfortunately I'm still nowhere to get the problem solved. I'm stuck in this underrun problem. Thanks --- Yuri Jaeger Monti On Tue, Aug 26, 2008 at 11:22 AM, Yuri Jaeger Monti <yurijm@gmail.com> wrote: > Thanks for your reply Steve! > > I'm using the AIC23 driver bundled in the OMAP kernel, I tried playing > through OSS directly to /dev/dsp (which gives me the best results, > choppy sound though) and through ALSA which is similar. Doing cat > test.wav > /dev/dsp or /dev/audio just gives me noise output. And I > still can't record anything. > > I've tried every player possible. Here is the output of aplay: > > root@DEA /opt/audios/wav # aplay -lL > default:CARD=AIC23 > OSK AIC23, omap alsa pcm > Default Audio Device > null > Discard all samples (playback) or generate zero samples (capture) > **** List of PLAYBACK Hardware Devices **** > card 0: AIC23 [OSK AIC23], device 0: OMAP PCM [omap alsa pcm] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > root@DEA /opt/audios # aplay audio_44100_16PCM.au -vv > Playing Sparc Audio 'audio_44100_16PCM.au' : Signed 16 bit Big Endian, > Rate 44100 Hz, Stereo > Plug PCM: Linear conversion PCM (S16_LE) > Its setup is: > stream : PLAYBACK > access : RW_INTERLEAVED > format : S16_BE > subformat : STD > channels : 2 > rate : 44100 > exact rate : 44100 (44100/1) > msbits : 16 > buffer_size : 32768 > period_size : 2048 > period_time : 46439 > tick_time : 0 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 2048 > xfer_align : 2048 > start_threshold : 32768 > stop_threshold : 32768 > silence_threshold: 0 > silence_size : 0 > boundary : 1073741824 > Slave: Hardware PCM card 0 'OSK AIC23' device 0 subdevice 0 > Its setup is: > stream : PLAYBACK > access : MMAP_INTERLEAVED > format : S16_LE > subformat : STD > channels : 2 > rate : 44100 > exact rate : 44100 (44100/1) > msbits : 16 > buffer_size : 32768 > period_size : 2048 > period_time : 46439 > tick_time : 0 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 2048 > xfer_align : 2048 > start_threshold : 32768 > stop_threshold : 32768 > silence_threshold: 0 > silence_size : 0 > boundary : 1073741824 > ############### +| 99%underrun!!! > (at least 0.366 ms long) > Status: > state : XRUN > trigger_time: 1217931313.815063477 > tstamp : 1217931313.815307617 > delay : 0 > avail : 32768 > avail_max : 32768 > ############## +| 99%underrun!!! > (at least 0.152 ms long) > Status: > state : XRUN > trigger_time: 1217931314.353729248 > tstamp : 1217931314.353851319 > delay : 0 > avail : 32768 > avail_max : 32768 > ##################################################+| 99%underrun!!! > (at least 0.153 ms long) > Status: > state : XRUN > trigger_time: 1217931314.892425537 > tstamp : 1217931314.892547608 > delay : 0 > avail : 32768 > avail_max : 32768 > ##################################################+| 99%underrun!!! > (at least 0.092 ms long) > Status: > state : XRUN > trigger_time: 1217931315.467193604 > tstamp : 1217931315.467254639 > delay : 0 > avail : 32768 > avail_max : 32768 > ############################### +| 99%underrun!!! > (at least 0.092 ms long) > Status: > state : XRUN > trigger_time: 1217931316.107543946 > tstamp : 1217931316.107635498 > delay : 0 > avail : 34816 > avail_max : 34816 > ##################################################+| 99%underrun!!! > (at least 0.091 ms long) > Status: > state : XRUN > trigger_time: 1217931316.747711182 > tstamp : 1217931316.747802735 > delay : 0 > avail : 34816 > avail_max : 34816 > ##################################################+| 99%underrun!!! > (at least 0.122 ms long) > Status: > state : XRUN > trigger_time: 1217931317.326873780 > tstamp : 1217931317.326965332 > delay : 0 > avail : 32768 > avail_max : 32768 > ##DMA timeout with device 8#######################+| 99% > {sound_dma_irq_handler}-ERROR: DCSR_ERROR! > ##################################################+| 99% > > root@DEA /opt/audios/wav # aplay test.wav > Playing WAVE 'test.wav' : Unsigned 8 bit, Rate 24000 Hz, Mono > underrun!!! (at least 0.396 ms long) > > > When playing a long audio file, there is a lot of underruns (XRUN). > I've tried playing ogg files with ogg123, mp3 files with madplay and > also tested with a lot of different sample rates and bitrates, always > choppy sound (good quality but the audio looks like it's splitted into > chunks, and sometimes it loops in the end). > > Do you have any hint? > > Thanks > > > --- > Yuri Jaeger Monti > > > > On Mon, Aug 25, 2008 at 10:56 PM, Steve Poulsen <spoulsen@css-design.us> wrote: >> Yuri, >> >> We have had good luck with ARM audio under this setup. We did write our own >> AIC23 drivers which we used directly from our application. We used a device >> entry (/dev/aic23) that hooked in our driver. We were able to open those in >> any application and play/record or both. The only possible problem was if >> we tried to do things like "cat file.pcm > /dev/aic23". Although this would >> work, some cases would not work due to those applications buffering schemes. >> For example, this was bad: "cat /dev/aic23 > /dev/aic23". It would work, >> but would be choppy. >> How are you playing audio? >> >> Steve >> >> Yuri Jaeger Monti wrote: >>> >>> Hi fellows, >>> >>> I tried everything I could to solve the buffer underrun error's while >>> playing some audio in the OSK5912 with the AIC23, and I don't know >>> what should I do anymore. >>> I'm trying to simply output and audio file via the ARM, I think this >>> should be ok but the audio is always choppy. >>> Am I doing something wrong? Or perhaps should I use only the DSP >>> processor to play the audio? (didn't tried this yet because I need the >>> DSP to do other tasks). >>> >>> Cheers >>> >>> --- >>> Yuri Jaeger Monti >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> >> >> > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-08-28 17:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <65e025470808251004w109cece7t9caeaa81b422554b@mail.gmail.com>
2008-08-25 17:11 ` OMAP5912 AIC23 Yuri Jaeger Monti
2008-08-26 1:56 ` Steve Poulsen
2008-08-26 14:22 ` Yuri Jaeger Monti
2008-08-28 17:02 ` Yuri Jaeger Monti
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox