From: Adrian Hunter <ext-adrian.hunter@nokia.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "linux-omap@vger.kernel.org Mailing List" <linux-omap@vger.kernel.org>
Subject: [PATCH 2/9] OMAP: HSMMC: Ensure fclk is running before accessing HSMMC registers
Date: Fri, 21 Nov 2008 11:24:21 +0200 [thread overview]
Message-ID: <49267E45.8040804@nokia.com> (raw)
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 32 ++++++++++++++++++++------------
1 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index ee21a64..2eed691 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -154,26 +154,24 @@ struct mmc_omap_host {
struct timer_list idle_timer;
spinlock_t clk_lock; /* for changing enabled state */
- int fclk_enabled:1;
+ unsigned int fclk_enabled:1;
struct omap_mmc_platform_data *pdata;
};
-int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
+static int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
{
unsigned long flags;
- int ret;
+ int ret = 0;
spin_lock_irqsave(&host->clk_lock, flags);
if (host->fclk_enabled != state) {
if (state == ON) {
- if (host->fclk_enabled == OFF) {
- ret = clk_enable(host->fclk);
- if (ret != 0)
- return ret;
- dev_dbg(mmc_dev(host->mmc),
- "mmc_fclk: enabled\n");
- }
+ ret = clk_enable(host->fclk);
+ if (ret != 0)
+ goto err_out;
+
+ dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n");
/* Revisit: Change the timer bump based on real
MMC usage characteristics */
mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
@@ -184,8 +182,10 @@ int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
}
host->fclk_enabled = state;
}
+
+err_out:
spin_unlock_irqrestore(&host->clk_lock, flags);
- return 0;
+ return ret;
}
static void mmc_omap_idle_timer(unsigned long data)
@@ -557,6 +557,7 @@ static void mmc_omap_detect(struct work_struct *work)
mmc_carddetect_work);
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+ mmc_omap_fclk_state(host, ON);
if (host->carddetect) {
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
/*
@@ -785,8 +786,8 @@ static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
WARN_ON(host->mrq != NULL);
host->mrq = req;
- mmc_omap_prepare_data(host, req);
mmc_omap_fclk_state(host, ON);
+ mmc_omap_prepare_data(host, req);
mmc_omap_start_command(host, req->cmd, req->data);
}
@@ -798,6 +799,8 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
unsigned long regval;
unsigned long timeout;
+ mmc_omap_fclk_state(host, ON);
+
switch (ios->power_mode) {
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
@@ -869,6 +872,8 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) | OD);
+ if (ios->power_mode == MMC_POWER_OFF)
+ mmc_omap_fclk_state(host, OFF);
}
static int omap_hsmmc_get_cd(struct mmc_host *mmc)
@@ -1120,6 +1125,7 @@ static int omap_mmc_remove(struct platform_device *pdev)
struct resource *res;
u16 vdd = 0;
+ mmc_omap_fclk_state(host, ON);
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
/*
* Set the vdd back to 3V,
@@ -1170,6 +1176,8 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
if (host) {
+ mmc_omap_fclk_state(host, ON);
+
ret = mmc_suspend_host(host->mmc, state);
if (ret == 0) {
host->suspended = 1;
--
1.5.4.3
next reply other threads:[~2008-11-21 9:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-21 9:24 Adrian Hunter [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-11-21 9:23 [PATCH 0/9] OMAP: HSMMC: Patches Adrian Hunter
2008-11-21 9:37 ` Adrian Hunter
2008-11-21 9:44 ` [PATCH 2/9] OMAP: HSMMC: Ensure fclk is running before accessing HSMMC registers Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49267E45.8040804@nokia.com \
--to=ext-adrian.hunter@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox