[PATCH] omap_hsmmc: Flush posted write to IRQ

[Adrian Hunter <adrian.hunter@nokia.com>]

From: Kevin Hilman <khilman@deeprootsystems.com>

Spurious IRQs seen on MMC after 2.6.29.  Flush posted write in IRQ
handler.

The interrupt line is released by clearing the error status bits
in the MMCHS_STAT register, which must occur before the interrupt
handler returns to avoid unwanted irqs.  Hence the need to flush
the posted write.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---




This patch is slightly modified from Kevin's original, which is
here:

	http://marc.info/?l=linux-omap&m=123862814815052&w=2



 drivers/mmc/host/omap_hsmmc.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 04e5a0c..2ae6049 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -452,6 +452,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 	if (host->mrq == NULL) {
 		OMAP_HSMMC_WRITE(host->base, STAT,
 			OMAP_HSMMC_READ(host->base, STAT));
+		/* Flush posted write */
+		OMAP_HSMMC_READ(host->base, STAT);
 		return IRQ_HANDLED;
 	}
 
@@ -523,6 +525,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 	}
 
 	OMAP_HSMMC_WRITE(host->base, STAT, status);
+	/* Flush posted write */
+	OMAP_HSMMC_READ(host->base, STAT);
 
 	if (end_cmd || (status & CC))
 		mmc_omap_cmd_done(host, host->cmd);
-- 
1.5.6.3