Re: [PATCH] OMAP_LDP: Support LCD display as a FB device on ZOOM MDK (Re: LDP support)

["stanley.miao" <stanley.miao@windriver.com>]

[-- Attachment #1: Type: text/plain, Size: 312 bytes --]

Russell King - ARM Linux wrote:
> On Thu, May 07, 2009 at 11:01:35PM +0800, stanley.miao wrote:
>   
>> Hi, Tony,
>>
>> Now the kernel can't boot on LDP. The attached file is the boot log.
>>     
>
> No boot log found.
>
>
>   
Sorry, forgot to attach the boot log.

It is linux-omap master branch.

Stanley.



[-- Attachment #2: ldp_boot_log.txt --]
[-- Type: text/plain, Size: 1733 bytes --]

Uncompressing Linux.................................................................................................................... done, booting the kernel.
<5>Linux version 2.6.30-rc4-omap1-05873-g2489dcb (stanley@stanley-desktop) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-53)) #1 Thu May 7 22:52:12 CST9
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP LDP board
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>free_area_init_node: node 0, pgdat c038db50, node_mem_map c03a9000
<7>  Normal zone: 256 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 32512 pages, LIFO batch:7
<6>OMAP3430 ES2.1
<6>SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
<5>Kernel command line: root=/dev/nfs rw nfsroot=128.224.163.169:/export/rootfs console=ttyS2,115200n8 mem=128M ip=128.224.163.125:128.224.163.169:128.224.162.1:25}
<6>NR_IRQS:402
<6>Clocking rate (Crystal/DPLL/ARM core): 26.0/266/500 MHz
<6>GPMC revision 5.0
<6>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP34xx GPIO hardware version 2.5
PID hash table entries: 512 (order: 9, 2048 bytes)
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB = 128MB total
<5>Memory: 126036KB available (3176K code, 292K data, 132K init, 0K highmem)
<6>Calibrating delay loop...