From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: DSS porting problems Date: Thu, 04 Jun 2009 15:22:00 -0600 Message-ID: <4A283AF8.5010301@mlbassoc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from hermes.mlbassoc.com ([76.76.67.137]:4723 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751573AbZFDVWC (ORCPT ); Thu, 4 Jun 2009 17:22:02 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen Cc: linux-omap@vger.kernel.org I'm porting my platform (3530, very similar to LDP) to your tree. http://www.bat.org/~tomba/git/linux-omap-dss.git Since you have complete support for the 3430SDP, I started with that board file. I've added my own display (larger Hitachi screen that is 800x600). I've run into a few problems: * All output to the main frame buffer (/dev/fb0) seems to go to the very last line of the display. * The documentation (Documentation/arm/OMAP/DSS) does not seem to match what's in sysfs. In particular, there are no "horizontal" or "vertical" fields in the displayN tree. This makes the examples of how to clone, etc, not work. Any ideas what I should look at? Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------