* [PATCH] OMAP3: RX51: Define TWL4030 USB transceiver in board file
@ 2009-07-06 8:22 Roger Quadros
2009-07-06 9:51 ` Felipe Balbi
0 siblings, 1 reply; 3+ messages in thread
From: Roger Quadros @ 2009-07-06 8:22 UTC (permalink / raw)
To: tony; +Cc: felipe.balbi, linux-omap
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf67..56d931a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
+static struct twl4030_usb_data rx51_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data rx51_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
+ .usb = &rx51_usb_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
--
1.6.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] OMAP3: RX51: Define TWL4030 USB transceiver in board file
2009-07-06 8:22 [PATCH] OMAP3: RX51: Define TWL4030 USB transceiver in board file Roger Quadros
@ 2009-07-06 9:51 ` Felipe Balbi
2009-07-07 6:37 ` Roger Quadros
0 siblings, 1 reply; 3+ messages in thread
From: Felipe Balbi @ 2009-07-06 9:51 UTC (permalink / raw)
To: Quadros Roger (EXT-Teleca/Helsinki)
Cc: tony@atomide.com, Balbi Felipe (Nokia-D/Helsinki),
linux-omap@vger.kernel.org
On Mon, Jul 06, 2009 at 10:22:11AM +0200, Quadros Roger (EXT-Teleca/Helsinki) wrote:
please put some description here. Other than that:
> Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
> ---
> arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index 9a0bf67..56d931a 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
> .setup = rx51_twlgpio_setup,
> };
>
> +static struct twl4030_usb_data rx51_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data rx51_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
> @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
> .gpio = &rx51_gpio_data,
> .keypad = &rx51_kp_data,
> .madc = &rx51_madc_data,
> + .usb = &rx51_usb_data,
>
> .vaux1 = &rx51_vaux1,
> .vaux2 = &rx51_vaux2,
> --
> 1.6.0.4
--
balbi
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] OMAP3: RX51: Define TWL4030 USB transceiver in board file
2009-07-06 9:51 ` Felipe Balbi
@ 2009-07-07 6:37 ` Roger Quadros
0 siblings, 0 replies; 3+ messages in thread
From: Roger Quadros @ 2009-07-07 6:37 UTC (permalink / raw)
To: felipe.balbi; +Cc: tony@atomide.com, linux-omap@vger.kernel.org
Felipe Balbi wrote:
> On Mon, Jul 06, 2009 at 10:22:11AM +0200, Quadros Roger (EXT-Teleca/Helsinki) wrote:
>
> please put some description here. Other than that:
ok. will send updated patch with description. thanks for your comment.
>
>> Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
>
> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
>
>> ---
>> arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
>> 1 files changed, 5 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> index 9a0bf67..56d931a 100644
>> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
>> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
>> .setup = rx51_twlgpio_setup,
>> };
>>
>> +static struct twl4030_usb_data rx51_usb_data = {
>> + .usb_mode = T2_USB_MODE_ULPI,
>> +};
>> +
>> static struct twl4030_platform_data rx51_twldata = {
>> .irq_base = TWL4030_IRQ_BASE,
>> .irq_end = TWL4030_IRQ_END,
>> @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
>> .gpio = &rx51_gpio_data,
>> .keypad = &rx51_kp_data,
>> .madc = &rx51_madc_data,
>> + .usb = &rx51_usb_data,
>>
>> .vaux1 = &rx51_vaux1,
>> .vaux2 = &rx51_vaux2,
>> --
>> 1.6.0.4
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-07-07 6:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-06 8:22 [PATCH] OMAP3: RX51: Define TWL4030 USB transceiver in board file Roger Quadros
2009-07-06 9:51 ` Felipe Balbi
2009-07-07 6:37 ` Roger Quadros
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox