* PM: off mode @ 2009-07-14 12:01 Roger Quadros 2009-07-14 13:00 ` Roger Quadros 2009-07-14 16:58 ` Kevin Hilman 0 siblings, 2 replies; 11+ messages in thread From: Roger Quadros @ 2009-07-14 12:01 UTC (permalink / raw) To: Kevin Hilman, linux-omap@vger.kernel.org Hi Kevin, Off mode does not seem to work on RX51 on latest PM branch. I get a reboot if I set enable_off_mode and sleep_while_idle and I wait for timeout. Does it work on other platforms? regards, -roger ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-14 12:01 PM: off mode Roger Quadros @ 2009-07-14 13:00 ` Roger Quadros 2009-07-14 16:58 ` Kevin Hilman 1 sibling, 0 replies; 11+ messages in thread From: Roger Quadros @ 2009-07-14 13:00 UTC (permalink / raw) To: Kevin Hilman, linux-omap@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 306 bytes --] Roger Quadros wrote: > Hi Kevin, > > Off mode does not seem to work on RX51 on latest PM branch. I get a > reboot if I set enable_off_mode and sleep_while_idle and I wait for > timeout. > > Does it work on other platforms? > > regards, > -roger > It works with the attached config though. -roger [-- Attachment #2: rx51_config --] [-- Type: text/plain, Size: 47499 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-omap1 # Tue Jul 14 15:56:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_FREEZER=y # # System Type # # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_W90X900 is not set # # TI OMAP Implementations # CONFIG_ARCH_OMAP_OTG=y # CONFIG_ARCH_OMAP1 is not set # CONFIG_ARCH_OMAP2 is not set CONFIG_ARCH_OMAP3=y # CONFIG_ARCH_OMAP4 is not set # # OMAP Feature Selections # # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set CONFIG_OMAP_SMARTREFLEX=y CONFIG_OMAP_SMARTREFLEX_TESTING=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y # CONFIG_OMAP3_DEBOBS is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set CONFIG_OMAP_LL_DEBUG_UART3=y # CONFIG_OMAP_PM_NONE is not set # CONFIG_OMAP_PM_NOOP is not set CONFIG_OMAP_PM_SRF=y CONFIG_ARCH_OMAP34XX=y CONFIG_ARCH_OMAP3430=y # # OMAP Board Type # CONFIG_MACH_NOKIA_RX51=y # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OMAP_3430SDP is not set # CONFIG_MACH_OMAP3EVM is not set # CONFIG_MACH_OMAP3_BEAGLE is not set # CONFIG_MACH_OVERO is not set # CONFIG_MACH_OMAP3_PANDORA is not set # CONFIG_MACH_OMAP_ZOOM2 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y CONFIG_CPU_PABRT_IFAR=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y # CONFIG_OUTER_CACHE is not set # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_COMMON_CLKDEV=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set # CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # # CPU Power Management # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Floating point emulation # # # At least one emulation must be selected # CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y # # Power management options # CONFIG_PM=y CONFIG_PM_DEBUG=y # CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_SECURITY is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set CONFIG_PHONET=y # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set CONFIG_MTD_OOPS=y # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_OMAP_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # CONFIG_MTD_NAND is not set CONFIG_MTD_ONENAND=y # CONFIG_MTD_ONENAND_VERIFY_WRITE is not set # CONFIG_MTD_ONENAND_GENERIC is not set CONFIG_MTD_ONENAND_OMAP2=y # CONFIG_MTD_ONENAND_OTP is not set # CONFIG_MTD_ONENAND_2X_PROGRAM is not set # CONFIG_MTD_ONENAND_SIM is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set # # UBI - Unsorted block images # CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 # CONFIG_MTD_UBI_GLUEBI is not set # # UBI debugging options # # CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_OMAP_STI is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_AX88796 is not set CONFIG_SMC91X=m # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set # CONFIG_AR9170_USB is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # # # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set CONFIG_GPIO_TWL4030=y # # PCI GPIO expanders: # # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_TSC210X is not set # CONFIG_SENSORS_OMAP34XX is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set CONFIG_OMAP_WATCHDOG=m # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set CONFIG_TWL4030_CORE=y CONFIG_TWL4030_POWER=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # # Multimedia devices # # # Multimedia core support # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y # CONFIG_USB_GSPCA is not set # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set CONFIG_USB_PWC_INPUT_EVDEV=y # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_USB_DSBR is not set # CONFIG_USB_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set # CONFIG_DAB is not set # # Graphics support # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=y # # Display hardware drivers # # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y CONFIG_SND_SPI=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # # Special HID drivers # CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m # CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y CONFIG_USB_OTG=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # # OMAP 343x high speed USB support # # CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_PERIPHERAL is not set CONFIG_USB_MUSB_OTG=y CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set # CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m # CONFIG_USB_ZERO_HNPTEST is not set # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_OMAP_HS=m # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m # # LED drivers # # CONFIG_LEDS_OMAP is not set # CONFIG_LEDS_OMAP_PWM is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set # # LED Triggers # # CONFIG_LEDS_TRIGGERS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=m # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set CONFIG_RTC_DRV_TWL4030=m # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_BQ24022=y CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set # # CBUS support # # CONFIG_CBUS is not set # # File systems # CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_UBIFS_FS=y # CONFIG_UBIFS_FS_XATTR is not set # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Kernel hacking # CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y # # Tracers # # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-14 12:01 PM: off mode Roger Quadros 2009-07-14 13:00 ` Roger Quadros @ 2009-07-14 16:58 ` Kevin Hilman [not found] ` <988A3DF4-EE3C-4563-8748-B696795D5615@mac.com> 2009-07-15 9:13 ` PM: off mode Roger Quadros 1 sibling, 2 replies; 11+ messages in thread From: Kevin Hilman @ 2009-07-14 16:58 UTC (permalink / raw) To: Roger Quadros; +Cc: linux-omap@vger.kernel.org Roger Quadros <ext-roger.quadros@nokia.com> writes: > Hi Kevin, > > Off mode does not seem to work on RX51 on latest PM branch. I get a > reboot if I set enable_off_mode and sleep_while_idle and I wait for > timeout. > > Does it work on other platforms? > Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. On RX51, I'm using omap3_pm_defconfig with the debug UART changed to UART3 and things work fine here. I using rootfs from latest fiasco image, and it drops me into an early shell because /sbin/preinit fails in various ways. Note that I'm using an S2.0 GP board. Note also that I modified /sbin/preinit to launch another getty on ttyS2 so I get a shell since newer kernels ignore the ATAGs passed by nolo. Below is a console log of my boot so you can see what is going on. Because /sbin/preinit enables off-mode and sleep_while_idle, I just let it boot and it seems to work. Kevin \x04\x01\x0140\aV\x13\x02\x01\x12\x15\x01\x14\x15\x01NOLO X-Loader (v1.4.1, Mar 25 2009) Secondary image size 94388 Booting secondary [ 0.001] Nokia OMAP Loader v1.4.1 (Mar 25 2009) running on Nokia N00 S2.0 (RX-51) [ 0.011] I2C v3.12 [ 0.016] System DMA v4.0 [ 0.020] OneNAND device ID 0040, version ID 0121 (256 MiB, 66 MHz) [ 0.054] OneNAND blocks unlocked in 28034 us [ 0.059] Flash id: ec4021 [ 0.073] Partition table successfully read [ 0.081] Forcing power key boot reason (R&D flag set) [ 0.086] Reset reason: pwr_key [ 0.089] McSPI v2.1 [ 0.092] LP5523 found at I2C bus 2, address 0x32 [ 0.099] SMB138C: Not loading driver (version reg. 0x4a) [ 0.104] BQ24150 (rev. 2) found on I2C bus 1, address 0x6b [ 0.110] SSI version 1.0 [ 0.116] Battery voltage 3.668 V, BSI: 56 [ 0.122] Disabling charging (no battery present) [ 0.128] Initializing LCD panel [ 0.131] Detecting LCD panel moscow [ 0.135] Panel ID: 298b5c [ 0.138] Detected LCD panel: l4f00311 [ 0.142] DISPC: version 3.0 [ 0.147] LCD pixel clock 19200 kHz [ 0.178] Logo drawn in 5 ms (11700 kB/s) [ 0.286] Initializing USB [ 0.290] USB host detected [ 0.293] Entering USB loop [ 0.345] USB suspend signaling detected [ 0.497] USB reset received [ 0.569] SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 64 bytes) [ 0.583] USB reset received [ 0.653] SETUP: WR STD DEVICE SET_ADDRESS value 002d index 0000 length 0000 [ 0.680] SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 18 bytes) [ 0.689] SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 9 bytes) [ 0.700] SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 94 bytes) [ 0.710] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 00, index 0000, length 255 bytes) [ 0.720] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 02, index 0409, length 255 bytes) [ 0.730] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 01, index 0409, length 255 bytes) [ 0.741] SETUP: WR STD DEVICE SET_CONFIGURATION value 0001 index 0000 length 0000 [ 0.749] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 03, index 0409, length 255 bytes) [ 0.760] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.774] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.787] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.801] SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 [ 0.809] Flashing interface selected [ 0.813] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.823] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 0.830] Flashing mode entered [ 0.833] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 0.840] SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 [ 0.848] SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 [ 0.856] SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 [ 0.864] SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 [ 0.872] SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 001b [ 0.879] Receiving kernel (length 1822976) [ 0.941] Image successfully received [ 1.042] SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0092 [ 1.050] SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 [ 1.100] Boot requested (normal mode) Kernel command line: init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=ttyS2,115200 [ 1.120] Serial console disabled Uncompressing Linux....................................................................................................................... done, booting the kernel. Linux version 2.6.30-omap1-sdp-pm-default-06222-ge0cffc2 (khilman@vence) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-66) ) #6 PREEMPT Tue Jul 14 09:48:13 PDT 2009 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: Nokia RX-51 board Ignoring unrecognised tag 0x414f4d50 Memory policy: ECC disabled, Data cache writeback OMAP3430 ES3.0 SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=ttyS2,115200 NR_IRQS:402 Clocking rate (Crystal/DPLL/ARM core): 19.2/332/500 MHz Reprogramming SDRC clock to 332000000 Hz dpll3_m2_clk rate change failed: -22 GPMC revision 5.0 IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP34xx GPIO hardware version 2.5 PID hash table entries: 1024 (order: 10, 4096 bytes) OMAP clockevent source: GPTIMER1 at 32768 Hz Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 128MB = 256MB total Memory: 255744KB available (3376K code, 349K data, 120K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 544 bytes regulator: core version 0.5 NET: Registered protocol family 16 MUX: setup U8_34XX_GPIO54_DOWN (0xd80020b4): 0x0007 -> 0x010c MUX: setup G25_34XX_GPIO86_OUT (0xd80020fc): 0x0007 -> 0x0004 MUX: setup H19_34XX_GPIO164_OUT (0xd800219c): 0x0007 -> 0x0004 OMAP DMA hardware revision 4.0 bio: create slab <bio-0> at 0 i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 twl4030_mmc_init:332 twl4030_mmc_init:347 twl4030_mmc_init:347 regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VAUX2: 1800 mV normal standby regulator: VSIM: 1800 mV normal standby regulator: VAUX1: 2800 mV normal standby regulator: VAUX3: 2800 <--> 3000 mV normal standby regulator: VAUX4: 2800 mV normal standby i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz console [ttyMTD0] enabled NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 500 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 console [ttyS2] enabled brd: module loaded loop: module loaded i2c /dev entries driver smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org> eth0: SMC91C94 (rev 9) at d0860300 IRQ 214 [nowait] eth0: Invalid ethernet MAC address. Please set using ifconfig OneNAND driver initializing omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000 Muxed OneNAND 256MB 1.8V 16-bit (0x40) OneNAND version = 0x0121 Scanning device for bad blocks onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 247 at 0x01ee0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 287 at 0x023e0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 294 at 0x024c0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 311 at 0x026e0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 405 at 0x032a0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 711 at 0x058e0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 784 at 0x06200000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 1310 at 0x0a3c0000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 1424 at 0x0b200000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 1432 at 0x0b300000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 1624 at 0x0cb00000 onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 Bad eraseblock 1670 at 0x0d0c0000 Creating 6 MTD partitions on "omap2-onenand": 0x000000000000-0x000000020000 : "bootloader" 0x000000020000-0x000000080000 : "config" 0x000000080000-0x0000000c0000 : "log" mtdoops: Attached to MTD device 2 0x0000000c0000-0x0000002c0000 : "kernel" 0x0000002c0000-0x0000004c0000 : "initfs" 0x0000004c0000-0x000010000000 : "rootfs" UBI: attaching mtd5 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd5 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 251 MiB UBI: number of good PEBs: 1998 UBI: number of bad PEBs: 12 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1998 UBI: number of PEBs reserved for bad PEB handling: 19 UBI: max/mean erase counter: 27/11 cpuidle: using governor ladder cpuidle: using governor menu UBI: background thread "ubi_bgt0d" started, PID 378 TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. Power Management for TI OMAP3. SmartReflex driver initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 regulator_init_complete: incomplete constraints, leaving VCAM_ANA_28 on regulator_init_complete: incomplete constraints, leaving VMMC2_30 on regulator_init_complete: incomplete constraints, leaving V28 on regulator_init_complete: incomplete constraints, leaving VCSI on regulator_init_complete: incomplete constraints, leaving VDAC on regulator_init_complete: incomplete constraints, leaving VMMC1 on UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 253403136 bytes (247464 KiB, 241 MiB, 1964 LEBs) UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4190434 bytes (4092 KiB) VFS: Mounted root (ubifs filesystem) on device 254:1. Freeing init memory: 120K BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso26+0m5) multi-call binary Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory getbootstate: R&D mode enabled modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.30-omap1-sdp-pm-default-06222-ge0cffc2/modules.dep: No such file or directory Unable to open frame buffer device /dev/fb0 Unable to initialize. Exiting /sbin/preinit: line 320: cannot open /proc/component_version: no such file /sbin/preinit: line 320: cannot create /sys/devices/platform/gpio-switch/sleep_ind/state: nonexistent directory /sbin/preinit: line 324: cannot create /sys/devices/platform/gpio-switch/cmt_bsi/state: nonexistent directory getbootstate: Could not open /proc/component_version - No such file or directory getbootstate: Could not open /proc/bootreason - No such file or directory getbootstate: Bootreason could not be read getbootstate: Entering state 'MALF'. Starting shell BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso26+0m5) built-in shell (ash) Enter 'help' for a list of built-in commands. / # cat /debug/pm_debug/count usbhost_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1 per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1 dss_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1 neon_pwrdm (ON),OFF:0,RET:0,INA:4,ON:5 mpu_pwrdm (ON),OFF:0,RET:0,INA:4,ON:5 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 per_clkdm->per_pwrdm (9) usbhost_clkdm->usbhost_pwrdm (0) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (0) core_l4_clkdm->core_pwrdm (5) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) sgx_clkdm->sgx_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) / # echo mem > /sys/power/state PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) Successfully put all powerdomains to target state Restarting tasks ... done. / # cat /sys/power/enable_off_mode 1 / # cat /sys/power/sleep_while_idle 1 [ *** here I waited about 10-15 seconds *** ] / # cat /debug/pm_debug/count usbhost_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1 per_pwrdm (ON),OFF:6,RET:0,INA:0,ON:7 dss_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 core_pwrdm (ON),OFF:6,RET:0,INA:0,ON:7 neon_pwrdm (ON),OFF:6,RET:0,INA:7,ON:14 mpu_pwrdm (ON),OFF:6,RET:0,INA:7,ON:14 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:1 per_clkdm->per_pwrdm (9) usbhost_clkdm->usbhost_pwrdm (0) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (0) core_l4_clkdm->core_pwrdm (5) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) sgx_clkdm->sgx_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) / # ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <988A3DF4-EE3C-4563-8748-B696795D5615@mac.com>]
* Re: Stable PM release for Overo [not found] ` <988A3DF4-EE3C-4563-8748-B696795D5615@mac.com> @ 2009-07-14 17:28 ` Kevin Hilman 0 siblings, 0 replies; 11+ messages in thread From: Kevin Hilman @ 2009-07-14 17:28 UTC (permalink / raw) To: Elvis Dowson; +Cc: linux-omap Elvis Dowson <elvis.dowson@mac.com> writes: > Hi Kevin, > > On Jul 14, 2009, at 8:58 PM, Kevin Hilman wrote: > >> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. > > Would you happen to have a stable PM release that works with the > Overo, for linux-omap3-2.6.29? I've only tested the current PM branch (2.6.30 based) on Overo since I just recieved hardware, and I have no plans to test/support pm-2.6.29 on new platforms. In the initial announcment of the new PM branch, I mentioned I tested on Overo, but that Overo support in linux-omap master needs some updates and some testing before the PM branch will be very usable. Kevin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-14 16:58 ` Kevin Hilman [not found] ` <988A3DF4-EE3C-4563-8748-B696795D5615@mac.com> @ 2009-07-15 9:13 ` Roger Quadros 2009-07-15 13:02 ` Roger Quadros 1 sibling, 1 reply; 11+ messages in thread From: Roger Quadros @ 2009-07-15 9:13 UTC (permalink / raw) To: ext Kevin Hilman; +Cc: linux-omap@vger.kernel.org ext Kevin Hilman wrote: > Roger Quadros <ext-roger.quadros@nokia.com> writes: > >> Hi Kevin, >> >> Off mode does not seem to work on RX51 on latest PM branch. I get a >> reboot if I set enable_off_mode and sleep_while_idle and I wait for >> timeout. >> >> Does it work on other platforms? >> > > Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. > > On RX51, I'm using omap3_pm_defconfig with the debug UART changed to > UART3 and things work fine here. > > I using rootfs from latest fiasco image, and it drops me into an early > shell because /sbin/preinit fails in various ways. Note that I'm using > an S2.0 GP board. Note also that I modified /sbin/preinit to launch > another getty on ttyS2 so I get a shell since newer kernels ignore the > ATAGs passed by nolo. > > Below is a console log of my boot so you can see what is going on. > Because /sbin/preinit enables off-mode and sleep_while_idle, I just > let it boot and it seems to work. > > Kevin > I am having S2.1 board and it does not work on that. It gets locked up and restarts after idle timeout. But I checked that it works on S2.0 board. Any clue what could be the problem? -roger ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-15 9:13 ` PM: off mode Roger Quadros @ 2009-07-15 13:02 ` Roger Quadros 2009-07-15 13:31 ` Kevin Hilman 0 siblings, 1 reply; 11+ messages in thread From: Roger Quadros @ 2009-07-15 13:02 UTC (permalink / raw) To: ext Roger Quadros; +Cc: ext Kevin Hilman, linux-omap@vger.kernel.org ext Roger Quadros wrote: > ext Kevin Hilman wrote: >> Roger Quadros <ext-roger.quadros@nokia.com> writes: >> >>> Hi Kevin, >>> >>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>> timeout. >>> >>> Does it work on other platforms? >>> >> >> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >> >> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >> UART3 and things work fine here. >> >> I using rootfs from latest fiasco image, and it drops me into an early >> shell because /sbin/preinit fails in various ways. Note that I'm using >> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >> another getty on ttyS2 so I get a shell since newer kernels ignore the >> ATAGs passed by nolo. >> >> Below is a console log of my boot so you can see what is going on. >> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >> let it boot and it seems to work. >> >> Kevin >> > > I am having S2.1 board and it does not work on that. It gets locked up > and restarts after idle timeout. > But I checked that it works on S2.0 board. > > Any clue what could be the problem? > > -roger > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Kevin, I have some new observations. It works only if we load the kernel via USB. Instead, if we flash the kernel, it will not work even with S2.0 board. It boots to shell but after sleep timeout (5 seconds) console gets locked up and it reboots after a while. Can you please verify this? -roger ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-15 13:02 ` Roger Quadros @ 2009-07-15 13:31 ` Kevin Hilman 2009-07-15 13:53 ` Roger Quadros 0 siblings, 1 reply; 11+ messages in thread From: Kevin Hilman @ 2009-07-15 13:31 UTC (permalink / raw) To: Roger Quadros; +Cc: linux-omap@vger.kernel.org Roger Quadros <ext-roger.quadros@nokia.com> writes: > ext Roger Quadros wrote: >> ext Kevin Hilman wrote: >>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>> >>>> Hi Kevin, >>>> >>>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>>> timeout. >>>> >>>> Does it work on other platforms? >>>> >>> >>> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >>> >>> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >>> UART3 and things work fine here. >>> >>> I using rootfs from latest fiasco image, and it drops me into an early >>> shell because /sbin/preinit fails in various ways. Note that I'm using >>> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >>> another getty on ttyS2 so I get a shell since newer kernels ignore the >>> ATAGs passed by nolo. >>> >>> Below is a console log of my boot so you can see what is going on. >>> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >>> let it boot and it seems to work. >>> >>> Kevin >>> >> >> I am having S2.1 board and it does not work on that. It gets locked >> up and restarts after idle timeout. >> But I checked that it works on S2.0 board. >> >> Any clue what could be the problem? >> >> -roger >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > Kevin, > > I have some new observations. > > It works only if we load the kernel via USB. Instead, if we flash the > kernel, it will not work even with S2.0 board. It boots to shell but > after sleep timeout (5 seconds) console gets locked up and it reboots > after a while. Roger, Does this happen even with the working defconfig you sent the other day? Kevin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-15 13:31 ` Kevin Hilman @ 2009-07-15 13:53 ` Roger Quadros 2009-07-16 11:11 ` Roger Quadros 0 siblings, 1 reply; 11+ messages in thread From: Roger Quadros @ 2009-07-15 13:53 UTC (permalink / raw) To: ext Kevin Hilman; +Cc: linux-omap@vger.kernel.org ext Kevin Hilman wrote: > Roger Quadros <ext-roger.quadros@nokia.com> writes: > >> ext Roger Quadros wrote: >>> ext Kevin Hilman wrote: >>>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>>> >>>>> Hi Kevin, >>>>> >>>>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>>>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>>>> timeout. >>>>> >>>>> Does it work on other platforms? >>>>> >>>> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >>>> >>>> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >>>> UART3 and things work fine here. >>>> >>>> I using rootfs from latest fiasco image, and it drops me into an early >>>> shell because /sbin/preinit fails in various ways. Note that I'm using >>>> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >>>> another getty on ttyS2 so I get a shell since newer kernels ignore the >>>> ATAGs passed by nolo. >>>> >>>> Below is a console log of my boot so you can see what is going on. >>>> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >>>> let it boot and it seems to work. >>>> >>>> Kevin >>>> >>> I am having S2.1 board and it does not work on that. It gets locked >>> up and restarts after idle timeout. >>> But I checked that it works on S2.0 board. >>> >>> Any clue what could be the problem? >>> >>> -roger >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> Kevin, >> >> I have some new observations. >> >> It works only if we load the kernel via USB. Instead, if we flash the >> kernel, it will not work even with S2.0 board. It boots to shell but >> after sleep timeout (5 seconds) console gets locked up and it reboots >> after a while. > > Roger, > > Does this happen even with the working defconfig you sent the other day? > > Kevin The config that i sent does not work with S2.0 hardware in either case. It works with S2.1 hardware only in one case i.e. kernel load via USB. It does not work if kernel is flashed. Also when my config is used on S2.1, core always remains in ON mode and never hits RET/OFF mode. -roger ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-15 13:53 ` Roger Quadros @ 2009-07-16 11:11 ` Roger Quadros 2009-07-20 11:12 ` Roger Quadros 0 siblings, 1 reply; 11+ messages in thread From: Roger Quadros @ 2009-07-16 11:11 UTC (permalink / raw) To: ext Roger Quadros; +Cc: ext Kevin Hilman, linux-omap@vger.kernel.org ext Roger Quadros wrote: > ext Kevin Hilman wrote: >> Roger Quadros <ext-roger.quadros@nokia.com> writes: >> >>> ext Roger Quadros wrote: >>>> ext Kevin Hilman wrote: >>>>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>>>> >>>>>> Hi Kevin, >>>>>> >>>>>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>>>>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>>>>> timeout. >>>>>> >>>>>> Does it work on other platforms? >>>>>> >>>>> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >>>>> >>>>> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >>>>> UART3 and things work fine here. >>>>> >>>>> I using rootfs from latest fiasco image, and it drops me into an early >>>>> shell because /sbin/preinit fails in various ways. Note that I'm using >>>>> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >>>>> another getty on ttyS2 so I get a shell since newer kernels ignore the >>>>> ATAGs passed by nolo. >>>>> >>>>> Below is a console log of my boot so you can see what is going on. >>>>> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >>>>> let it boot and it seems to work. >>>>> >>>>> Kevin >>>>> >>>> I am having S2.1 board and it does not work on that. It gets locked >>>> up and restarts after idle timeout. >>>> But I checked that it works on S2.0 board. >>>> >>>> Any clue what could be the problem? >>>> >>>> -roger >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe >>>> linux-omap" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> >>> Kevin, >>> >>> I have some new observations. >>> >>> It works only if we load the kernel via USB. Instead, if we flash the >>> kernel, it will not work even with S2.0 board. It boots to shell but >>> after sleep timeout (5 seconds) console gets locked up and it reboots >>> after a while. >> >> Roger, >> >> Does this happen even with the working defconfig you sent the other day? >> >> Kevin > > The config that i sent does not work with S2.0 hardware in either case. > It works with S2.1 hardware only in one case i.e. kernel load via USB. > It does not work if kernel is flashed. > Also when my config is used on S2.1, core always remains in ON mode and > never hits RET/OFF mode. > > -roger Kevin, I just found out that it has nothing to do with kernel load via USB or not. I was using an initrd while USB load which used to change vdd1 OPP, that's why it was working. So the final conclusion is, after boot to shell, if we change VDD1 OPP, then off mode works fine on my S2.0 HS board. e.g. echo 1 > /sys/power/vdd1_opp echo 1 > /sys/power/sleep_while_idle echo 1 > /sys/power/enable_off_mode It works on S2.1 board too except that garbage characters are printed on console after idle timeout. Does this give any more clue to the problem? -roger > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-16 11:11 ` Roger Quadros @ 2009-07-20 11:12 ` Roger Quadros 2009-07-20 14:10 ` Kevin Hilman 0 siblings, 1 reply; 11+ messages in thread From: Roger Quadros @ 2009-07-20 11:12 UTC (permalink / raw) To: Roger Quadros; +Cc: ext Kevin Hilman, linux-omap@vger.kernel.org Roger Quadros wrote: > ext Roger Quadros wrote: >> ext Kevin Hilman wrote: >>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>> >>>> ext Roger Quadros wrote: >>>>> ext Kevin Hilman wrote: >>>>>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>>>>> >>>>>>> Hi Kevin, >>>>>>> >>>>>>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>>>>>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>>>>>> timeout. >>>>>>> >>>>>>> Does it work on other platforms? >>>>>>> >>>>>> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >>>>>> >>>>>> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >>>>>> UART3 and things work fine here. >>>>>> >>>>>> I using rootfs from latest fiasco image, and it drops me into an >>>>>> early >>>>>> shell because /sbin/preinit fails in various ways. Note that I'm >>>>>> using >>>>>> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >>>>>> another getty on ttyS2 so I get a shell since newer kernels ignore >>>>>> the >>>>>> ATAGs passed by nolo. >>>>>> >>>>>> Below is a console log of my boot so you can see what is going on. >>>>>> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >>>>>> let it boot and it seems to work. >>>>>> >>>>>> Kevin >>>>>> >>>>> I am having S2.1 board and it does not work on that. It gets locked >>>>> up and restarts after idle timeout. >>>>> But I checked that it works on S2.0 board. >>>>> >>>>> Any clue what could be the problem? >>>>> >>>>> -roger >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe >>>>> linux-omap" in >>>>> the body of a message to majordomo@vger.kernel.org >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>> >>>> Kevin, >>>> >>>> I have some new observations. >>>> >>>> It works only if we load the kernel via USB. Instead, if we flash the >>>> kernel, it will not work even with S2.0 board. It boots to shell but >>>> after sleep timeout (5 seconds) console gets locked up and it reboots >>>> after a while. >>> >>> Roger, >>> >>> Does this happen even with the working defconfig you sent the other day? >>> >>> Kevin >> >> The config that i sent does not work with S2.0 hardware in either case. >> It works with S2.1 hardware only in one case i.e. kernel load via USB. >> It does not work if kernel is flashed. >> Also when my config is used on S2.1, core always remains in ON mode >> and never hits RET/OFF mode. >> >> -roger > > Kevin, > > I just found out that it has nothing to do with kernel load via USB or > not. I was using an initrd while USB load which used to change vdd1 OPP, > that's why it was working. > > So the final conclusion is, after boot to shell, if we change VDD1 OPP, > then off mode works fine on my S2.0 HS board. > e.g. > echo 1 > /sys/power/vdd1_opp > echo 1 > /sys/power/sleep_while_idle > echo 1 > /sys/power/enable_off_mode > > It works on S2.1 board too except that garbage characters are printed on > console after idle timeout. > > Does this give any more clue to the problem? > > -roger > Hi Kevin, What compiler version do you use? >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: PM: off mode 2009-07-20 11:12 ` Roger Quadros @ 2009-07-20 14:10 ` Kevin Hilman 0 siblings, 0 replies; 11+ messages in thread From: Kevin Hilman @ 2009-07-20 14:10 UTC (permalink / raw) To: Roger Quadros; +Cc: linux-omap@vger.kernel.org Roger Quadros <ext-roger.quadros@nokia.com> writes: > Roger Quadros wrote: >> ext Roger Quadros wrote: >>> ext Kevin Hilman wrote: >>>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>>> >>>>> ext Roger Quadros wrote: >>>>>> ext Kevin Hilman wrote: >>>>>>> Roger Quadros <ext-roger.quadros@nokia.com> writes: >>>>>>> >>>>>>>> Hi Kevin, >>>>>>>> >>>>>>>> Off mode does not seem to work on RX51 on latest PM branch. I get a >>>>>>>> reboot if I set enable_off_mode and sleep_while_idle and I wait for >>>>>>>> timeout. >>>>>>>> >>>>>>>> Does it work on other platforms? >>>>>>>> >>>>>>> Yes, I tested on SDP, omap3evm, Beagle, Overo and RX51. >>>>>>> >>>>>>> On RX51, I'm using omap3_pm_defconfig with the debug UART changed to >>>>>>> UART3 and things work fine here. >>>>>>> >>>>>>> I using rootfs from latest fiasco image, and it drops me into >>>>>>> an early >>>>>>> shell because /sbin/preinit fails in various ways. Note that >>>>>>> I'm using >>>>>>> an S2.0 GP board. Note also that I modified /sbin/preinit to launch >>>>>>> another getty on ttyS2 so I get a shell since newer kernels >>>>>>> ignore the >>>>>>> ATAGs passed by nolo. >>>>>>> >>>>>>> Below is a console log of my boot so you can see what is going on. >>>>>>> Because /sbin/preinit enables off-mode and sleep_while_idle, I just >>>>>>> let it boot and it seems to work. >>>>>>> >>>>>>> Kevin >>>>>>> >>>>>> I am having S2.1 board and it does not work on that. It gets locked >>>>>> up and restarts after idle timeout. >>>>>> But I checked that it works on S2.0 board. >>>>>> >>>>>> Any clue what could be the problem? >>>>>> >>>>>> -roger >>>>>> -- >>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>> linux-omap" in >>>>>> the body of a message to majordomo@vger.kernel.org >>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>>> >>>>> Kevin, >>>>> >>>>> I have some new observations. >>>>> >>>>> It works only if we load the kernel via USB. Instead, if we flash the >>>>> kernel, it will not work even with S2.0 board. It boots to shell but >>>>> after sleep timeout (5 seconds) console gets locked up and it reboots >>>>> after a while. >>>> >>>> Roger, >>>> >>>> Does this happen even with the working defconfig you sent the other day? >>>> >>>> Kevin >>> >>> The config that i sent does not work with S2.0 hardware in either case. >>> It works with S2.1 hardware only in one case i.e. kernel load via >>> USB. It does not work if kernel is flashed. >>> Also when my config is used on S2.1, core always remains in ON mode >>> and never hits RET/OFF mode. >>> >>> -roger >> >> Kevin, >> >> I just found out that it has nothing to do with kernel load via USB >> or not. I was using an initrd while USB load which used to change >> vdd1 OPP, that's why it was working. >> >> So the final conclusion is, after boot to shell, if we change VDD1 >> OPP, then off mode works fine on my S2.0 HS board. >> e.g. >> echo 1 > /sys/power/vdd1_opp >> echo 1 > /sys/power/sleep_while_idle >> echo 1 > /sys/power/enable_off_mode >> >> It works on S2.1 board too except that garbage characters are >> printed on console after idle timeout. >> >> Does this give any more clue to the problem? >> >> -roger >> > > Hi Kevin, > > What compiler version do you use? > I currely use CSL 2008q3, but am switching to 2009q1-161 Kevin ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2009-07-20 14:10 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-14 12:01 PM: off mode Roger Quadros
2009-07-14 13:00 ` Roger Quadros
2009-07-14 16:58 ` Kevin Hilman
[not found] ` <988A3DF4-EE3C-4563-8748-B696795D5615@mac.com>
2009-07-14 17:28 ` Stable PM release for Overo Kevin Hilman
2009-07-15 9:13 ` PM: off mode Roger Quadros
2009-07-15 13:02 ` Roger Quadros
2009-07-15 13:31 ` Kevin Hilman
2009-07-15 13:53 ` Roger Quadros
2009-07-16 11:11 ` Roger Quadros
2009-07-20 11:12 ` Roger Quadros
2009-07-20 14:10 ` Kevin Hilman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox