From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Fr=E9d=E9ric_BEGOU?= Subject: Re: linux omap on sdp broken? Date: Tue, 22 Sep 2009 11:57:37 +0200 Message-ID: <4AB89F91.3030601@sios.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtp2e.orange.fr ([80.12.242.112]:33785 "EHLO smtp2e.orange.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755548AbZIVJ5U (ORCPT ); Tue, 22 Sep 2009 05:57:20 -0400 Received: from me-wanadoo.net (localhost [127.0.0.1]) by mwinf2e11.orange.fr (SMTP Server) with ESMTP id 3CFCA8000107 for ; Tue, 22 Sep 2009 11:57:22 +0200 (CEST) Received: from me-wanadoo.net (localhost [127.0.0.1]) by mwinf2e11.orange.fr (SMTP Server) with ESMTP id 30B03800010B for ; Tue, 22 Sep 2009 11:57:22 +0200 (CEST) Received: from [192.168.48.102] (LPuteaux-151-43-16-109.w217-128.abo.wanadoo.fr [217.128.255.109]) by mwinf2e11.orange.fr (SMTP Server) with ESMTP id C25B98000109 for ; Tue, 22 Sep 2009 11:57:21 +0200 (CEST) Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Hello, It's working on my beagleboard with rev 52a962f from tmlind master tree. I have integrated some patches, but would be happy to share my config if it helps. U-Boot 2009.01 (Apr 29 2009 - 13:23:12) OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 256 MB NAND: 256 MiB In: serial Out: serial Err: serial Board revision C Serial #67fe00030000000004013f790600700b Hit any key to stop autoboot: 0 OMAP3 beagleboard.org # setenv bootargs console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=1 nohz=off video=omapfb:vram:2M,vram:4M OMAP3 beagleboard.org # saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x260000 -- 100% complete. Writing to Nand... done OMAP3 beagleboard.org # boot reading noyau.bin 1961336 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-2.6.31-omap1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1961272 Bytes = 1.9 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux........................................................................................................................... Linux version 2.6.31-omap1 (build@build) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 Mon Sep 21 18:44:30 CEST 2009 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 Beagle Board Memory policy: ECC disabled, Data cache writeback OMAP3430 ES3.0 SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=1 nohz=off video=omapfb:vram:2M,vram:4M PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 128MB = 256MB total Memory: 255744KB available (3396K code, 304K data, 120K init, 0K highmem) NR_IRQS:402 Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz Reprogramming SDRC clock to 332000000 Hz GPMC revision 5.0 IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP34xx GPIO hardware version 2.5 OMAP clockevent source: GPTIMER12 at 32768 Hz Console: colour dummy device 80x30 Calibrating delay loop... 490.52 BogoMIPS (lpj=1916928) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 Found NAND on CS0 Registering NAND on CS0 OMAP DMA hardware revision 4.0 bio: create slab at 0 i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VUSB1V5: 1500 mV normal standby regulator: VUSB1V8: 1800 mV normal standby regulator: VUSB3V1: 3100 mV normal standby regulator: VPLL2: 1800 mV normal standby regulator: VSIM: 1800 <--> 3000 mV normal standby i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb twl4030_usb twl4030_usb: Initialized TWL4030 USB module musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) .. 2001-2006 Red Hat, Inc. msgmni has been set to 499 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered omapfb: configured for panel omap3beagle coherent allocation too big (requested 0x200000 mask 0xffffffff) omapfb omapfb: unable to allocate FB DMA memory omapfb omapfb: controller initialization failed (-12) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 console [ttyS2] enabled brd: module loaded loop: module loaded i2c /dev entries driver omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) cmdlinepart partition parsing not available Creating 6 MTD partitions on "omap2-nand": 0x000000000000-0x000000080000 : "X-Loader" 0x000000080000-0x000000260000 : "U-Boot" 0x000000260000-0x000000280000 : "U-Boot Env" 0x000000280000-0x000000680000 : "Kernel" 0x000000680000-0x000008380000 : "File System" 0x000008380000-0x000010000000 : "Applications" usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock Registered led device: beagleboard::usr0 Registered led device: beagleboard::usr1 Registered led device: beagleboard::pmu_stat Advanced Linux Sound Architecture Driver Version 1.0.20. No device for DAI twl4030 No device for DAI twl4030 Voice No device for DAI omap-mcbsp-dai-0 No device for DAI omap-mcbsp-dai-1 No device for DAI omap-mcbsp-dai-2 No device for DAI omap-mcbsp-dai-3 No device for DAI omap-mcbsp-dai-4 OMAP3 Beagle SoC init TWL4030 Audio Codec init asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok ALSA device list: #0: omap3beagle (twl4030) TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. Power Management for TI OMAP3. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 regulator_init_complete: incomplete constraints, leaving VDVI on regulator_init_complete: incomplete constraints, leaving VDAC on drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting 1sec before mounting root device... mmc0: new high speed SD card at address b368 mmcblk0: mmc0:b368 SMI 1.85 GiB mmcblk0: p1 p2 kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS on mmcblk0p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 120K INIT: version 2.86 booting Regards, Fred.