X-loader / U-Boot query

[Gary Thomas <gary@mlbassoc.com>]

I have a new board - OMAP 3530 with 512MB DRAM & NAND
I've build X-loader and U-Boot for it and it mostly comes
up.  The sources I used (based on recommendations from the
BeagleBoard pages) were:
   http://git.gitorious.org/x-load-omap3/mainline.git
   git://git.denx.de/u-boot.git

I had to make a small change to get it to recognize the
larger NAND FLASH device.

The problem I have now is that it's only seeing 1/2 (256MB)
of the available DRAM.

* Does anyone know how to get it to see all 512MB?
* Is there a better place to ask/discuss these questions?
   A cursory look around did not point to anything fresh (most
   of the web pages & Wikis I looked are are _years_ old)

Thanks for any help/pointers

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------