From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: X-loader / U-Boot query Date: Thu, 08 Oct 2009 06:58:07 -0600 Message-ID: <4ACDE1DF.1010303@mlbassoc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from hermes.mlbassoc.com ([76.76.67.137]:44757 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757158AbZJHNIS (ORCPT ); Thu, 8 Oct 2009 09:08:18 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "linux-omap@vger.kernel.org" I have a new board - OMAP 3530 with 512MB DRAM & NAND I've build X-loader and U-Boot for it and it mostly comes up. The sources I used (based on recommendations from the BeagleBoard pages) were: http://git.gitorious.org/x-load-omap3/mainline.git git://git.denx.de/u-boot.git I had to make a small change to get it to recognize the larger NAND FLASH device. The problem I have now is that it's only seeing 1/2 (256MB) of the available DRAM. * Does anyone know how to get it to see all 512MB? * Is there a better place to ask/discuss these questions? A cursory look around did not point to anything fresh (most of the web pages & Wikis I looked are are _years_ old) Thanks for any help/pointers -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------