Re: X-loader / U-Boot query

[Adam Machalek <adam.machalek@astc-design.com>]

The problem is located in u-boot/cpu/arm_cortexa8/omap3/mem.c

Function do_sdrc_init()

There is an assumption that the RAM size on each CS is maximum of 128M.  
See this line:

writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
      RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
      DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);


Adam

Gary Thomas wrote:
> I have a new board - OMAP 3530 with 512MB DRAM & NAND
> I've build X-loader and U-Boot for it and it mostly comes
> up.  The sources I used (based on recommendations from the
> BeagleBoard pages) were:
>   http://git.gitorious.org/x-load-omap3/mainline.git
>   git://git.denx.de/u-boot.git
>
> I had to make a small change to get it to recognize the
> larger NAND FLASH device.
>
> The problem I have now is that it's only seeing 1/2 (256MB)
> of the available DRAM.
>
> * Does anyone know how to get it to see all 512MB?
> * Is there a better place to ask/discuss these questions?
>   A cursory look around did not point to anything fresh (most
>   of the web pages & Wikis I looked are are _years_ old)
>
> Thanks for any help/pointers
>