From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: DSS2 frame buffer problem Date: Tue, 13 Oct 2009 06:55:39 -0600 Message-ID: <4AD478CB.2040302@mlbassoc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from hermes.mlbassoc.com ([76.76.67.137]:56276 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752818AbZJMM4Q (ORCPT ); Tue, 13 Oct 2009 08:56:16 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen Cc: OMAP Linux discussion I have a new board that I'd like to run a frame buffer 800x600x24 When I boot, I get this error: omapfb: failed to allocate framebuffer This board is derived from a board I'm already running DSS2 at 800x600x16 on. What do I need to change to get this to work? Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------