* DSS2 frame buffer problem
@ 2009-10-13 12:55 Gary Thomas
2009-10-13 12:59 ` Tomi Valkeinen
0 siblings, 1 reply; 3+ messages in thread
From: Gary Thomas @ 2009-10-13 12:55 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: OMAP Linux discussion
I have a new board that I'd like to run a frame buffer 800x600x24
When I boot, I get this error:
omapfb: failed to allocate framebuffer
This board is derived from a board I'm already running DSS2 at
800x600x16 on.
What do I need to change to get this to work?
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: DSS2 frame buffer problem
2009-10-13 12:55 DSS2 frame buffer problem Gary Thomas
@ 2009-10-13 12:59 ` Tomi Valkeinen
2009-10-13 13:27 ` Gary Thomas
0 siblings, 1 reply; 3+ messages in thread
From: Tomi Valkeinen @ 2009-10-13 12:59 UTC (permalink / raw)
To: ext Gary Thomas; +Cc: OMAP Linux discussion
On Tue, 2009-10-13 at 14:55 +0200, ext Gary Thomas wrote:
> I have a new board that I'd like to run a frame buffer 800x600x24
> When I boot, I get this error:
> omapfb: failed to allocate framebuffer
>
> This board is derived from a board I'm already running DSS2 at
> 800x600x16 on.
>
> What do I need to change to get this to work?
Most likely you need to allocate more VRAM with vram boot option, in
board file or kernel config option (CONFIG_OMAP2_VRAM_SIZE).
Tomi
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: DSS2 frame buffer problem
2009-10-13 12:59 ` Tomi Valkeinen
@ 2009-10-13 13:27 ` Gary Thomas
0 siblings, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2009-10-13 13:27 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: OMAP Linux discussion
On 10/13/2009 06:59 AM, Tomi Valkeinen wrote:
> On Tue, 2009-10-13 at 14:55 +0200, ext Gary Thomas wrote:
>> I have a new board that I'd like to run a frame buffer 800x600x24
>> When I boot, I get this error:
>> omapfb: failed to allocate framebuffer
>>
>> This board is derived from a board I'm already running DSS2 at
>> 800x600x16 on.
>>
>> What do I need to change to get this to work?
>
> Most likely you need to allocate more VRAM with vram boot option, in
> board file or kernel config option (CONFIG_OMAP2_VRAM_SIZE).
Thanks, that was it.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-10-13 13:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-13 12:55 DSS2 frame buffer problem Gary Thomas
2009-10-13 12:59 ` Tomi Valkeinen
2009-10-13 13:27 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox