From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: Re: DSS2 frame buffer problem Date: Tue, 13 Oct 2009 07:27:58 -0600 Message-ID: <4AD4805E.10808@mlbassoc.com> References: <4AD478CB.2040302@mlbassoc.com> <1255438791.27268.42.camel@tubuntu> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from hermes.mlbassoc.com ([76.76.67.137]:54337 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752119AbZJMN2f (ORCPT ); Tue, 13 Oct 2009 09:28:35 -0400 In-Reply-To: <1255438791.27268.42.camel@tubuntu> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: tomi.valkeinen@nokia.com Cc: OMAP Linux discussion On 10/13/2009 06:59 AM, Tomi Valkeinen wrote: > On Tue, 2009-10-13 at 14:55 +0200, ext Gary Thomas wrote: >> I have a new board that I'd like to run a frame buffer 800x600x24 >> When I boot, I get this error: >> omapfb: failed to allocate framebuffer >> >> This board is derived from a board I'm already running DSS2 at >> 800x600x16 on. >> >> What do I need to change to get this to work? > > Most likely you need to allocate more VRAM with vram boot option, in > board file or kernel config option (CONFIG_OMAP2_VRAM_SIZE). Thanks, that was it. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------