Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer

[Chris Hudson <chudson@kionix.com>]

Pandita, Vikram wrote:
>> -----Original Message-----
>> From: Chris Hudson [mailto:chudson@kionix.com]
>>
>> Pandita, Vikram wrote:
>>     
>>> Chris
>>>       
> <snip>
>   
>>> Any way to test these features of accelerometer with your set of 3 patches applied?
>>>
>>> Say with a busybox filesystem or poky?
>>>
>>>       
>> Sure, I've been using busybox with the ZoomII and testing the hardware
>> throughout the development process.  You'll need to attach a KXTE9 to
>>     
>
> I thought the accelerometer was a built-in feature of zoom2?
> Can you give reference of details of KXTE9 module? Is it to be plugged in to come connector on zoom2?
>   
There are two accelerometers built into the OMAP ZoomII: a MEMSIC and a 
Bosch.(1)  From what I've seen, they don't seem to be initialized in any 
stardard kernel configuration for this platform.

To work with the KXTE9, I used a 200-pin connecter(2) mounted to the J43 
expansion header, which is under the camera cover on the ZoomII. 

The KXTE9 product specification is available here: 
http://www.kionix.com/accelerometers/accelerometer-KXTE9.html

(1)https://gforge.ti.com/gf/project/omapzoom/wiki/?pagename=WhatIsZoom2
(2)http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=sam8019-nd&x=0&y=0

>   
>> the i2c-2 bus, vdd, iovdd, ground, and gpio156 on the J43 header if
>> using a ZoomII.  I can give you the exact pins I'm using if you would like.
>> Thank you,
>> Chris
>>     
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>