From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Hudson Subject: Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer Date: Thu, 12 Nov 2009 09:33:06 -0500 Message-ID: <4AFC1CA2.7070206@kionix.com> References: <1257971179-28225-1-git-send-email-chudson@kionix.com> <4AFB21D2.2000007@kionix.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from barracuda.kionix.com ([205.232.90.213]:38483 "EHLO mail.kionix.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752729AbZKLOdH (ORCPT ); Thu, 12 Nov 2009 09:33:07 -0500 In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "Pandita, Vikram" Cc: "linux-omap@vger.kernel.org" , "linux-input@vger.kernel.org" , "dmitry.torokhov@gmail.com" Pandita, Vikram wrote: >> -----Original Message----- >> From: Chris Hudson [mailto:chudson@kionix.com] >> >> Pandita, Vikram wrote: >> >>> Chris >>> > > >>> Any way to test these features of accelerometer with your set of 3 patches applied? >>> >>> Say with a busybox filesystem or poky? >>> >>> >> Sure, I've been using busybox with the ZoomII and testing the hardware >> throughout the development process. You'll need to attach a KXTE9 to >> > > I thought the accelerometer was a built-in feature of zoom2? > Can you give reference of details of KXTE9 module? Is it to be plugged in to come connector on zoom2? > There are two accelerometers built into the OMAP ZoomII: a MEMSIC and a Bosch.(1) From what I've seen, they don't seem to be initialized in any stardard kernel configuration for this platform. To work with the KXTE9, I used a 200-pin connecter(2) mounted to the J43 expansion header, which is under the camera cover on the ZoomII. The KXTE9 product specification is available here: http://www.kionix.com/accelerometers/accelerometer-KXTE9.html (1)https://gforge.ti.com/gf/project/omapzoom/wiki/?pagename=WhatIsZoom2 (2)http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=sam8019-nd&x=0&y=0 > >> the i2c-2 bus, vdd, iovdd, ground, and gpio156 on the J43 header if >> using a ZoomII. I can give you the exact pins I'm using if you would like. >> Thank you, >> Chris >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > >