TFTP on beagle board

TFTP on beagle board

[Mai Daftedar]

Hi all,
   I was wondering how can we configure the u-boot with the TFTP
capability on the beagle board at runtime..
Or if there's anyother way to set it up to be able to transfer files
to the beagle...

  Any help will be appreciated..
Thanks
Best Regards
Mai

Re: TFTP on beagle board

[Dirk Behme]

Mai Daftedar wrote:
> Hi all,
>    I was wondering how can we configure the u-boot with the TFTP
> capability on the beagle board at runtime..

For this you will need ethernet support in U-Boot. There are two (?) 
options to achieve this: Add support for USB ethernet dongle in U-Boot 
or use a Beagle expansion card with ethernet.

Regarding USB ethernet dongle, there are some basic USB patches for 
Beagle U-Boot on the list. But I'm not sure how much work it is to 
enable them to support USB ethernet.

For ethernet on expansion board, there is TinCanTool's Zippy board 
[1]. To access ethernet on this board from U-Boot, an U-Boot OMAP3 SPI 
driver is missing.

Both options are not ready, yet, and need some development work. Any 
help is greatly appreciated!

Cheers

Dirk

Btw.: I added U-Boot list, it is the better place to discuss this.

[1] 
http://www.tincantools.com/product.php?productid=16147&cat=0&page=1&featured