From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Vrabel Subject: Re: [PATCH 3/3] mmc: omap_hsmmc: enable SDIO card interrupts Date: Thu, 18 Feb 2010 12:15:46 +0000 Message-ID: <4B7D2F72.2070307@csr.com> References: <846fbf1a68cde5fd2d7c7ab084ace239c8de6867.1265801967.git.david.vrabel@csr.com> <9ce6cf93ba1e6c3fd239f732ea5889a856948db3.1265801967.git.david.vrabel@csr.com> <004901cab001$6b19f6c0$544ff780@am.dhcp.ti.com> <4B7C4608.5010008@csr.com> <001b01cab031$0f34e010$544ff780@am.dhcp.ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <001b01cab031$0f34e010$544ff780@am.dhcp.ti.com> Sender: linux-mmc-owner@vger.kernel.org To: Madhusudhan Cc: linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org List-Id: linux-omap@vger.kernel.org Madhusudhan wrote: > > My question was more related to the idle path. In a scenario where > you start using the SDIO functionality and after some time you leave > the SDIO card idle, does the FCLK still remain enabled? Or do you see > that sdio_irq_thread exits and disables the FCLK? What do you mean by "leave the SDIO card idle"? David -- David Vrabel, Senior Software Engineer, Drivers CSR, Churchill House, Cambridge Business Park, Tel: +44 (0)1223 692562 Cowley Road, Cambridge, CB4 0WZ http://www.csr.com/ Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom