From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: DVSDK on OMAP/3530 Date: Fri, 16 Apr 2010 13:27:19 -0600 Message-ID: <4BC8BA17.5060200@mlbassoc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from hermes.mlbassoc.com ([76.76.67.137]:46158 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758536Ab0DPT1V (ORCPT ); Fri, 16 Apr 2010 15:27:21 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: OMAP Linux discussion I'm trying to run the DVSDK 3.01.00.03 on an OMAP/3530 board which is not the OMAP3EVM (close, but from a different manufacturer). I've ported my board specifics to the kernel that comes with the DVSDK and everything seems to work. Except for the video demos :-( When I try to run 'decode', it attempts to open the device '/dev/video1' which I've deduced is a display in video mode. However, I can't figure out where or how that device is supposed to be created. I've compared my kernel config with the standard EVM config and all of the VIDEO/DSS/FB options match. Can someone give me some help/guidance? note: I'm not sure the best place to ask this - the DVSDK getting started guide refers to omap3530_dvevm_beta@list.ti.com but I cannot find it... Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------