diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8848c7c..a93ae3d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -49,6 +49,8 @@
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "pm.h"
+#include "omap3-opp.h"
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
@@ -71,6 +73,26 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+/*
+ * FIXME: These are not the optimal setup values to be used on overo
+ * Hacked from board-3430sdp.c
+ */
+static struct prm_setup_vc omap3_setuptime_table = {
+	.clksetup = 0xff,
+	.voltsetup_time1 = 0xfff,
+	.voltsetup_time2 = 0xfff,
+	.voltoffset = 0xff,
+	.voltsetup2 = 0xff,
+	.vdd0_on = 0x30,
+	.vdd0_onlp = 0x20,
+	.vdd0_ret = 0x1e,
+	.vdd0_off = 0x00,
+	.vdd1_on = 0x2c,
+	.vdd1_onlp = 0x20,
+	.vdd1_ret = 0x1e,
+	.vdd1_off = 0x00,
+};
+
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,	/* 0: slave, 1: master */
@@ -384,6 +406,8 @@ static void __init overo_init_irq(void)
 {
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap3_pm_init_opp_table();
+	omap3_pm_init_vc(&omap3_setuptime_table);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();