TWL scripts, and booting pm-2.6.29 on Beagleboard

TWL scripts, and booting pm-2.6.29 on Beagleboard

[Peter Tseng]

Hello everyone.

I am attempting to get the branch named pm-2.6.29 of Kevin Hilman's
linux-omap-pm repo to boot on a Beagleboard revision B5.

The purpose of this is to apply some patches made by Russ Dill about a
year ago [1] that allow a low-power sleep by adding some TWL scripts. I
have been unable to determine whether these are working with the branch
named pm (I am aware that the second and fourth patch are already
applied, so I only need the first and third), so I figured it was best
to start from the same point that Russ Dill started at, which he reports
is pm-2.6.29

The trouble is that pm-2.6.29 does not boot (I boot from an SD card, use
the config file named omap3_beagle_pm_defconfig, and use u-boot 2009.11)
-- no output is printed after "Uncompressing Linux... done, booting the
kernel."
Normally, I would enable CONFIG_EARLY_PRINTK and provide some resulting
output, but this option seems to be missing from the branch in question.

I asking for help in one of the following:
1) Whether there is any alternative way to get useful output to diagnose
why pm-2.6.29 is not booting.
2) How to apply the patch similarly to the current pm branch. (Have the
relevant sections been moved to a generic file at board-3430sdp.c ? Is
there anything else I need to know? Is there documentation on what
exactly these scripts are doing?)
3) Whether there's any alternative way to achieve the same objectives of
power savings.

I appreciate your support in this.

Peter Tseng

[1]
http://groups.google.com/group/beagleboard/browse_thread/thread/197a8ef6b46cc828/6e98db4cbe2cebaa