Kevin Hilman had written, on 01/06/2011 12:15 PM, the following: > Koen Kooi writes: > >> Op 6 jan 2011, om 16:43 heeft Brad Parker het volgende geschreven: >> >>> It's probably expected, but I can't get the EHCI USB port to work >>> on a beagle board XM (36xx) using the current omap tree. >>> >>> It this most likely due to these clock issues? >> You need this patch: http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/ >> >> I'm currently too lazy to split it up like Nishant wants as I don't >> see the point splitting for the sake of splitting.-- > > IMO, it doesn't need to be split up. > > But it does have to fix the other comments I made on the same thread[1] > > 1) add a descriptive changelog, and > 2) Cc linux-arm-kernel Kevin, there are four things being done in the patch: a) fix GPIO number for EHCI power on b) fix GPIO number for DVI reset line c) switch on DVI d) switch on Camera I have split the first 2 up. I just splitting the (c) up when I noticed the code is confusing - I will reply in thread to the original patch. I apologize, but I disagree - as far as I see it, these are separate changes being done. -- Regards, Nishanth Menon