From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: Re: Open issues after 2.6.38 merge window Date: Fri, 14 Jan 2011 16:22:16 -0600 Message-ID: <4D30CC98.1090508@ti.com> References: <20110114194758.GM4957@atomide.com> <20110114223701.11e0f7d1.jhnikula@gmail.com> <20110114205424.GQ4957@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from na3sys009aog105.obsmtp.com ([74.125.149.75]:45089 "EHLO na3sys009aog105.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752450Ab1ANWWV (ORCPT ); Fri, 14 Jan 2011 17:22:21 -0500 Received: by mail-yx0-f175.google.com with SMTP id 5so1331678yxd.6 for ; Fri, 14 Jan 2011 14:22:20 -0800 (PST) In-Reply-To: <20110114205424.GQ4957@atomide.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tony Lindgren Cc: Jarkko Nikula , linux-omap@vger.kernel.org Tony Lindgren wrote, on 01/14/2011 02:54 PM: > * Jarkko Nikula [110114 12:34]: >> On Fri, 14 Jan 2011 11:47:58 -0800 >> Tony Lindgren wrote: >> >>> - omap4 panda powers down after boot (watchdog?) >>> >>> - omap3 ldp board powers down after boot? >>> >> my 2c to Panda power down problem: >> >> Nishanth helped me recently to debug why my board does this power down >> and it seems to be caused by a broken hw. I.e. we were using exactly >> same bootloader and kernel and only my board was not working. > > Hmm, mine was working just fine until about a week ago. > I did update the bootloader also though. What's the recommended > x-loader + u-boot combo for panda? The combination I had used was: x-loader: http://gitorious.org/x-loader/x-loader u-boot: http://git.denx.de/?p=u-boot.git;a=summary The issue on the board potentially could be solder issue and RMA was recommended. -- Regards, Nishanth Menon