From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: Re: [PATCH] omap3: Add basic support for 720MHz part Date: Wed, 19 Jan 2011 11:06:54 +0200 Message-ID: <4D36A9AE.1010606@ti.com> References: <1295336995-15831-1-git-send-email-premi@ti.com> <789E54BD-D2B6-4B98-B9B8-19688E415E39@dominion.thruhere.net> <4D35C47D.6000102@ti.com> <4F6B1267-93B8-4698-9880-376076825598@dominion.thruhere.net> <3b2df4e1c65667c6383d654cca4be8ac@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from na3sys009aog101.obsmtp.com ([74.125.149.67]:52255 "EHLO na3sys009aog101.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753069Ab1ASJG6 (ORCPT ); Wed, 19 Jan 2011 04:06:58 -0500 Received: by mail-yw0-f53.google.com with SMTP id 6so174664ywa.12 for ; Wed, 19 Jan 2011 01:06:58 -0800 (PST) In-Reply-To: <3b2df4e1c65667c6383d654cca4be8ac@mail.gmail.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Vishwanath Sripathy Cc: Koen Kooi , Sanjeev Premi , l-o List , Thara Gopinath Vishwanath Sripathy wrote, on 01/19/2011 10:56 AM: > If you want a quick hack, you can modify the voltage for 700M marginally > (like you have done above). But it needs to be done in multiple places. > You need to modify IVA OPP6 entry in opp table and OPP6 voltage value in > voltage.h as well besides above change. This should work. we may want to be sure about keeping the additional voltages in 1 step increment (12.5mV - to ensure twl conversion routines sane)- i think we may be pretty much maxed out for the tps chip used, no? -- Regards, Nishanth Menon