Re: [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP

[Nishanth Menon <nm@ti.com>]

Shweta Gulati wrote, on 03/05/2011 03:21 PM:
> Almost all OMAP4 boards support OPP 800 MHz and OPP 1 GHz.
> Enable them in OPP Table. For small minority of boards which use
> OMAP4430-800 MHz device OPP 1GHz is not supported,
> OPP 1GHz should be disabled from board file.
>
> Signed-off-by: Shweta Gulati<shweta.gulati@ti.com>
> Cc: linux-arm-kernel@lists.infradead.org
> ---
>   arch/arm/mach-omap2/opp4xxx_data.c |    4 ++--
>   1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
> index 57f1498..93b9744 100644
> --- a/arch/arm/mach-omap2/opp4xxx_data.c
> +++ b/arch/arm/mach-omap2/opp4xxx_data.c
> @@ -71,9 +71,9 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
>   	/* MPU OPP2 - OPP100 */
>   	OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV),
>   	/* MPU OPP3 - OPP-Turbo */
> -	OPP_INITIALIZER("mpu", false, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
> +	OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
>   	/* MPU OPP4 - OPP-SB */
> -	OPP_INITIALIZER("mpu", false, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
> +	OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
>   	/* L3 OPP1 - OPP50 */
>   	OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV),
>   	/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
Acked-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon